Network of technical supplies in the 2006 BIEMH
Recent advances in magnetic materials as "Neodymium" (5 times more powerful than conventional ferrite magnets) and the Poles square geometry gives them a formidable force.
The dishes are controlled for the magnetization and the degaussing a unit designed with components more advanced and secure electronics current, guaranteeing at all times a zero residual flow.
The control units can be operated, either via the controls located on the front panel of the same, either through a digital keypad.
These dishes are manufactured in two versions: SD 50, with a density standard square magnetic poles 50 x 50 mm to work with good size and normal iron to 50 AD, with a high density of square magnetic poles 50 x 50 mmsuitable for difficult pieces and specially adapted to work with polar expansions.
In cases that do not want to work by placing the piece directly on the magnet are supplied some extenders of poles which can be fixed or mobile (that adhere to the surface of the piece) allowing interns drills without damaging the surface of the plate.
It also introduces a new range of 5 models of magnetic elevators of command manual with an attractive design and a great power of elevation from 300 Kg, up to a maximum of 2,000 Kg.
A single person is sufficient to use the lift safely. Ensures a coefficient of operational safety of 3 to 1 between the proven strength and the recommended maximum load