Iberfluid Instruments, S.A. - Gate valves
Vortex
Valves of gate: for abrasive products
Iberfluid Instruments, of the hand of his represented Vortex Valves, enters a model to his series of valves of gate, that in addition to keeping the characteristic robustness of the “Aggregate Gate” of Vortex, incorporates some stamps of very high estanqueidad. This design, is the ideal solution for abrasive products that includes from any type of graneles, until coal, dust of metal or of minerals, until 400 °F (204 °C) .
The gate remains installed on a body of steel to the carbon and is available in standard sizes of 6 "to 30" (100 mm to 750 mm) and square and rectangular geometries of until 72 "(1,8 m) and upper. Other characteristics that allow to the valve close, even through a column of product, are his bevel-edged design, his lamina resistant to the abrasion and his receptor in the zone of closing.
The characteristics of “dynamic load” of the stamps, compensates and warns the escape of product to the cover of the gate. These stamps are of easy replacement without need to withdraw the valve of service. The gate is easily accessible and incorporates rollers of adjustable temperate steel in place of simple guides of the leaf to ensure a suitable maintenance of the positive stamps.
The adaptation of the gate to an already existent system, is of easy realisation thanks to a wide selection of controls of positioning, limit switches and bridas. The valve also offers a big variety of alternatives to give fit to different of ranks of temperature, humidity, levels of corrosion and explosive environingingments.
The valves of gate Vortex has several options of performance - electrical, hydraulics, pneumatics, of chain, and of steering wheel. The characteristics include rollers of temperate steel, engrasadores, switches of lateral setting, contacts in steel to the carbon, transitions of entrance / gone out, connections sealed, etc.
The gate remains installed on a body of steel to the carbon and is available in standard sizes of 6 "to 30" (100 mm to 750 mm) and square and rectangular geometries of until 72 "(1,8 m) and upper. Other characteristics that allow to the valve close, even through a column of product, are his bevel-edged design, his lamina resistant to the abrasion and his receptor in the zone of closing.
The characteristics of “dynamic load” of the stamps, compensates and warns the escape of product to the cover of the gate. These stamps are of easy replacement without need to withdraw the valve of service. The gate is easily accessible and incorporates rollers of adjustable temperate steel in place of simple guides of the leaf to ensure a suitable maintenance of the positive stamps.
The adaptation of the gate to an already existent system, is of easy realisation thanks to a wide selection of controls of positioning, limit switches and bridas. The valve also offers a big variety of alternatives to give fit to different of ranks of temperature, humidity, levels of corrosion and explosive environingingments.
The valves of gate Vortex has several options of performance - electrical, hydraulics, pneumatics, of chain, and of steering wheel. The characteristics include rollers of temperate steel, engrasadores, switches of lateral setting, contacts in steel to the carbon, transitions of entrance / gone out, connections sealed, etc.
