Sandvik Coromant Ibérica, S.A. - Indexable end mills
Sandvik Coromant CoroMill 345
Tool of milling: designed mainly for the planned of high performance
CoroMill 345 is a concept advanced of tool, perfect for all type of mechanised, from small batches and miscellaneous to big volumes of production of special pieces. Designed mainly for the planned of high performance with reduced depths of cut in a wide range of materials, his versatilidad and his possibilities of optimisation for long scope also do it adapted for demanding operations of desbaste from 6 mm of depth until finishings of mirror with plaquitas rascadoras.
The alternative of additional step (HX) of CoroMill 345 allows a greater capacity of start of metal thanks to the greater number of teeth by cutting.
As it corresponds to a frontal strawberry of 45° developed and of new generation, CoroMill 345 is provista of plaquitas of double expensive with eight edges. The resaltes of the plates of support strategically placed coincide with the faces of desprendimiento of the plaquita, by what offer a complete support to the edge of cut, as well as a big stability of the seat.
The positive axial inclination with small depths of cut makes possible a soft action of cut with a reduced axial pressesure, what to his time reduces the strengths of cut in the interior of the piece. The top of the edge goes in in action progressively to measure that deepens in the cut, what confers to the plaquita a more robust structure that increases the hygiene, especially in areas of demanding application.
CoroMill 345 is apt for all type of machines tool, from small machines ISO 30 of low power to big machining centres 50 ISO of high power and machines multitarea. The milling cutters offer in diameters of 40 to 250 mm with diverse options of step.
The alternative of additional step (HX) of CoroMill 345 allows a greater capacity of start of metal thanks to the greater number of teeth by cutting.
As it corresponds to a frontal strawberry of 45° developed and of new generation, CoroMill 345 is provista of plaquitas of double expensive with eight edges. The resaltes of the plates of support strategically placed coincide with the faces of desprendimiento of the plaquita, by what offer a complete support to the edge of cut, as well as a big stability of the seat.
The positive axial inclination with small depths of cut makes possible a soft action of cut with a reduced axial pressesure, what to his time reduces the strengths of cut in the interior of the piece. The top of the edge goes in in action progressively to measure that deepens in the cut, what confers to the plaquita a more robust structure that increases the hygiene, especially in areas of demanding application.
CoroMill 345 is apt for all type of machines tool, from small machines ISO 30 of low power to big machining centres 50 ISO of high power and machines multitarea. The milling cutters offer in diameters of 40 to 250 mm with diverse options of step.
