Branson Ultrasonidos, S.A.E. - Ultrasonic plastic welders
Branson 2.000 X
Sources of digital feeding and control of processes: with four sources of feeding and three units of pressesure that provide a high functionality
The versatilidad that offer the possibilities of combination of the series 2.000X allows to user configure a system to measure for his application of particular welding.
According to the distinct requirements of process, is possible to choose between four sources of feeding and between three units of pressesure that provide a high functionality.
Source of digital feeding:
• tactile Screen.
• Communications.
• Outlined of amplitudes.
• Outlined of strengths.
• Control of strengths.
• Control of power.
• Blockade of energetic activation.
• Gestión of data.
• Screen of visualisation of quality.
The sources of digital feeding of the series 2.000X are systems to proof of future that include a digital processor. They work to frequencies of 20 kHz, 30 kHz or 40 kHz and provide gone out between 800 and 4.000 watts. The different models of sources of available feeding allow his application to diverse purposes.
In conjunction with the unit of pressesure or the suitable actuator, allow to adapt to a specific configuration that fulfil all the requirements of the industry of the plastic weldings. Diverse interfaces make possible the communication with upper systems.
All the processes of operation and regulation of the digital unit are controlled by a microprocessor.
In comparison with the analog components, the consequent digital design presents remarkable advantages:
Analysis of resonances: direct analysis of the generator of waves in relation with the state of resonance of the team.
Autoescaneado: Detection of parameters of important control or of resonant capacity
tactile Screen: it adjust, I handle and determination of diagnostic and errors simplified; adjustable indication of the Graphic
results of welding: graphic indicator of the notable parameters for the welding, such as the frequency, the distance, the strength, the capacity and the amplitude
digital Control of amplitudes: adjust precise of the amplitude in a field of application between the 10 % and the 100 %
Measure of the strength: it adjust of the initial strength and measure of the strength for a repetibilidad upper.
Programmable initial swing: four different rhythms of start, 10, 35, 80 and 105 milliseconds, to
accommodate to the characteristics of start of a wide range of resonators
Autosintonización digital real with memory: sintonización entirely automatic and storage of
the frequency of resonance after each Diverse
welding possibilities of connection: Ethernet, USB, RS232, interface for control from PLC
Information of system advanced: all the addressable parameters by interfaces
Flexibility of adaptation to the application: extension of spectrum during the process as it adjust
Windows CE / X Net: Windows CE for indication and options of versatile adaptation of systems of external
control, integration in networks and control to distance through X Net.
Ways of operation for specific applications
Time: the welding effects during a time preestablecido
Detection of earth: the welding effects until the detection of earth with time of adjustable retention
Power*: the welding effects to a level of power preestablecido
Improves tip: the welding effects to a level of power preestablecido
Distance of collapse*: the welding effects along a distance preestablecida, the distance of welding
does not measure until it reaches the strength of trigger preestablecida
absolute Distance*: the welding effects along a distance preestablecida, measures the complete
route of the sonotrodo (of particular use for the finishing of pieces with a very clear-cut height).
All the ways of welding can be controlled by means of values adjustable limit.
According to the distinct requirements of process, is possible to choose between four sources of feeding and between three units of pressesure that provide a high functionality.
Source of digital feeding:
• tactile Screen.
• Communications.
• Outlined of amplitudes.
• Outlined of strengths.
• Control of strengths.
• Control of power.
• Blockade of energetic activation.
• Gestión of data.
• Screen of visualisation of quality.
The sources of digital feeding of the series 2.000X are systems to proof of future that include a digital processor. They work to frequencies of 20 kHz, 30 kHz or 40 kHz and provide gone out between 800 and 4.000 watts. The different models of sources of available feeding allow his application to diverse purposes.
In conjunction with the unit of pressesure or the suitable actuator, allow to adapt to a specific configuration that fulfil all the requirements of the industry of the plastic weldings. Diverse interfaces make possible the communication with upper systems.
All the processes of operation and regulation of the digital unit are controlled by a microprocessor.
In comparison with the analog components, the consequent digital design presents remarkable advantages:
Analysis of resonances: direct analysis of the generator of waves in relation with the state of resonance of the team.
Autoescaneado: Detection of parameters of important control or of resonant capacity
tactile Screen: it adjust, I handle and determination of diagnostic and errors simplified; adjustable indication of the Graphic
results of welding: graphic indicator of the notable parameters for the welding, such as the frequency, the distance, the strength, the capacity and the amplitude
digital Control of amplitudes: adjust precise of the amplitude in a field of application between the 10 % and the 100 %
Measure of the strength: it adjust of the initial strength and measure of the strength for a repetibilidad upper.
Programmable initial swing: four different rhythms of start, 10, 35, 80 and 105 milliseconds, to
accommodate to the characteristics of start of a wide range of resonators
Autosintonización digital real with memory: sintonización entirely automatic and storage of
the frequency of resonance after each Diverse
welding possibilities of connection: Ethernet, USB, RS232, interface for control from PLC
Information of system advanced: all the addressable parameters by interfaces
Flexibility of adaptation to the application: extension of spectrum during the process as it adjust
Windows CE / X Net: Windows CE for indication and options of versatile adaptation of systems of external
control, integration in networks and control to distance through X Net.
Ways of operation for specific applications
Time: the welding effects during a time preestablecido
Detection of earth: the welding effects until the detection of earth with time of adjustable retention
Power*: the welding effects to a level of power preestablecido
Improves tip: the welding effects to a level of power preestablecido
Distance of collapse*: the welding effects along a distance preestablecida, the distance of welding
does not measure until it reaches the strength of trigger preestablecida
absolute Distance*: the welding effects along a distance preestablecida, measures the complete
route of the sonotrodo (of particular use for the finishing of pieces with a very clear-cut height).
All the ways of welding can be controlled by means of values adjustable limit.
