Beko Tecnológica España, S.L. - Other systems of fluids sorting

Öwamat Of Beko is a system of separation of water and applicable effective oil to the technicians of condensed, which composes in general of 99% by water and only 1% of oil. Thus, the purification of the condensed oleoso in the own company results more economic that the collected realised by third. Öwamat Ensures a clean and safe separation, that fulfils with all the requirements of hygiene and allows the poured of the water to the sewerage when having a pollution of inferior oil to the 20 mg/l. It can have a system of heating in case it installs in areas with danger of frosts. His operation is simple: the condensed oleoso arrives to the camera of download of the Öwamat and in the manifold of particles of dirt accumulate the solid impurities dragged. In the tank of the separation accumulates the oil in the surface and evacuates through the rebosadero adjustable in height. After this, the condensed predepurado flows to the prefiltro (that it absorbs the drops of oil) and afterwards by a filter of adsorption (that it retains the particles of remaining oil).

The discharge of air compressesed with the Öwamat 2 vary as if the compressesor is of screw or of pistón and in function of the climatic zone where work (green zone: dry and cold climate, blue zone: temperate climate and red zone: tropical climate). Like this, with compressesors of screws, the discharge of oil of turbine is of 4,5, 4,0 and 2,5 m3/min, of oil VDL is of 4,0, 3,5 and 2,0 m3/min and of oil VCL of 3,0, 2,5 and 1,5 m3/min. In the case of compressesors of pistón, the oil of turbine is of 2,4, 2,0 or 1,0 according to the climatological zone.

Öwamat Offers a big orifice of the tube evacuador of oil for oil resinificados and avoids that the oil decanted accumulate in the filters. Optionally it is possible the transmission of the signal of alarm of an electrical sensor installed in the avisador of level to a room of control.