Durán Electrónica, S.L. - Gas detectors
Duran Electrónica Eurosondelco CO
Carbon monoxide detectors: for underground car parks, tunnels, general industry
Detector, RS485, for electrochemical sensor for the detection of monoxide carbon (CO). Developed exclusively for use with Eurosondelco and Siemens CC62P.
The carbon monoxide (CO) is a colorless, odorless and poisonous gas product of the incomplete combustion of fossil fuels (gasoline, butane, propane, natural gas, oil, coal and wood), which is very dangerous to be breathed even in small quantities.
Some sources of CO emission are the fuel burners badly or improperly installed, water heaters, fireplaces, vehicles, gasoline, etc.
Main applications: underground car parks, tunnels, industry in general. Electrochemical sensor and microprocessor technology that incorporates filter for SOx / NOx / H2S.
Technical: supply voltage: 9V to 15V DC power consumption 8mA (standby): 15mA (alarm) measurement range: 0 to 400 ppm resolution: ±2 ppm reproducibility: 1% scale linearity: linear full-scale calibration Gas mixture accurate: 200 ppm CO + N2 ml / life of sensor min: 4 years under normal conditions of work relative humidity: 15% to 90% (continuous) and from 0% to 99% (intermittent) atmospheric pressure ±10% operating temperature: from - 15 ° C to + 50 ° C response time: T90 < 40 s cable entry: using cable gland PG9 self-locking IP67 communication: RS485 addressable (1 to 16) degree of protection: IP65 Material: MAKROLON & ABS weight (g) and measures (mm) 325 / 120 x 150 x 63 1.8 installation height / 2 m from the ground coverage: 200 m2 (according to regulations in force).
The carbon monoxide (CO) is a colorless, odorless and poisonous gas product of the incomplete combustion of fossil fuels (gasoline, butane, propane, natural gas, oil, coal and wood), which is very dangerous to be breathed even in small quantities.
Some sources of CO emission are the fuel burners badly or improperly installed, water heaters, fireplaces, vehicles, gasoline, etc.
Main applications: underground car parks, tunnels, industry in general. Electrochemical sensor and microprocessor technology that incorporates filter for SOx / NOx / H2S.
Technical: supply voltage: 9V to 15V DC power consumption 8mA (standby): 15mA (alarm) measurement range: 0 to 400 ppm resolution: ±2 ppm reproducibility: 1% scale linearity: linear full-scale calibration Gas mixture accurate: 200 ppm CO + N2 ml / life of sensor min: 4 years under normal conditions of work relative humidity: 15% to 90% (continuous) and from 0% to 99% (intermittent) atmospheric pressure ±10% operating temperature: from - 15 ° C to + 50 ° C response time: T90 < 40 s cable entry: using cable gland PG9 self-locking IP67 communication: RS485 addressable (1 to 16) degree of protection: IP65 Material: MAKROLON & ABS weight (g) and measures (mm) 325 / 120 x 150 x 63 1.8 installation height / 2 m from the ground coverage: 200 m2 (according to regulations in force).
