This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Nuevo centro de torneado - fresado Trevisan para grandes dimensionesThe new DS1800/600C model marketed by M.P.E. allows turning pieces up to 3,000 mm
New center of turning - milling Trevisan for large dimensions
Drafting Interempresas17/12/2010
December 17, 2010
M.P.E. It presents the new center of turning Trevisan DS1800/600C. This new model allows turning, milling, and end the complete machining of the piece in a single mooring and with a single machine, respecting the levels of tolerance, and greatly reducing the time of production of a piece of large dimensions, that are eliminated completely the times of preparation and adjustment of the piece to the change of machine.
The DS1800/600C Center allows turning up to 3,000 mm, because it incorporates a dish of turning managed by CNC with a career axis or 600 mm and a length of 900 millimetres, they get a radio of turning 1. 500 mm and 1,600 mm hub Y1.
On the other hand, knowing the importance of the drilling and milling of certain parts on the outside of the turning, the DS1800/600C model, incorporates a unit of milling/drilling with a RAM of 1,210 mm mounted on a second axis and with a career of 3,250 millimeters.
With a mobile column structure, and because of the availability of two round tables, the DS1800/600C Center allows Mechanising a piece as it stands, focuses and prepares the following in the other table. Another possibility which allows the DS1800/600C Centre thanks to the option of incorporating a table tilting is to be able present the piece in the corner for their processing.
Example of mechanization of a rotor of wind turbine at the new Trevisán DS1800/600C.
Related Companies or Entities
Maquinaria de Producción Europea, S.L.
