A look at the latest of Regloplas K 2010
October 7, 2010
System of temperature control unit
The control system for units of temperature RT100 Regloplas, in Spain control distributed Commercial Coscollola, equipped with a large configurable display and 3.5-inch TFT color display. The user interface is equipped with an integrated dial that provides a simple and intuitive navigation.
Compact unit for water pressure to over 160 ° C
The new line S of water pressure controllers are a very innovative way of covering the spectrum of the lower capacity lines, using water at temperatures of up to 160 ° C and 8 kW of heat capacity. They are available in two versions: the P140S model and the model P160S.
New version of the mid-range of pressurized water unit
The latest M models incorporate the latest technology to cover its increased capacity using water up 160 ° C of temperature and heat capacity 18 kW. They are available in two versions: the P140M model to temperatures of up to 140 ° C, and the P160M model to temperatures of up to 160 ° C and the P140M model to temperatures up to 140 ° C.
Control of temperature in entry level unit
The latest addition to the family of controllers of temperature level is the 300smart, which incorporates a RT61 driver. Its warming ability reaches the 6kW, combined with cooling capacity 70kW. This unit is a very competitive alternative to conventional temperature control units to solve specific problems both large and small productions.
Systems of cooling and heating energy savers
Regloplas and Industrial Frigo have formed a 'joint venture' under the name RegloChill. Its product lines range from mobile refrigerators to heaters of 1,000 kW of cooling capacity. They can be combined in a modular way and expand for central cooling systems. RegloChill also offers a cooler by stroke of air with a capacity of up to 1,400 kW. The most remarkable feature of the K2010 is the IES (System of energy-saving integrated in its acronym in English). IES uses a combination of free cooler and cooling water compressor unit. Active cooling unit is only used when the ambient temperature is higher than that required for the water.