Commercial Coscollola in Equiplast 2008

Since its foundation in Barcelona in 1965, Coscollola commercial has dedicated its activity to the representation of machinery for injection of plastic, peripheral and standardized for moulds and matrices. With a specialization marked both the supply of these products and facilities keys in hand taking advantage of the 'know-how' that provide these fields, Coscollola presents the news of their represented at Equiplast 2008.

For restraint of moulds for injection, extrusion machines, cylinders, tanks and other applications. In a nutshell: minimum rate of rejections from the start of production. Best performance of the mold filling and narrow tolerances without problems. It has a better surface finish of the parts.

In the manufacture of injected pieces, with a correct temperature of the mold, the rejection can be reduced by up to 24 percent and profitability can increase by up to 20 per cent (study conducted by the Polytechnic School of Aachen).

Equipment for pressurized water are recommended in applications where the advantages of the water as heat fluid have a determining role, even above 90 ° C.

For restraint of injection moulds, moulds for casting pressure, cylinder, extrusion machines, mixers and other applications. Optimal heat transmission directly influencing the productivity of your installation.

For restraint of molds for die casting pressure, extrusion machines, cylinders, tanks, mixers and other applications. To manufacture parts cast to pressure, the atemperadores Regloplas provide a reduction of rejections of up by 80 percent, increase the length of the molds of two to three times, and shorten time of warming up by 30 per cent.

Individual Chargers Motan make it possible that the transformers of plastic can automate significant parts of the production process of economical and effective way and significantly improve the management of the process.

Excellent homogeneity at the same time that a maximum repeatability are the main demands direct dosing of additives and materials crushed in the processing machine. Dosing equipment and mixers Minicolor and Gravicolor meet these requirements to a large extent.

In the processing of technical plastics of high quality, smooth and efficient drying of the material is a decisive factor to obtain a maximum quality of the product. The Luxor dryers are inexpensive, reliable and easy to handle and can be used for the most diverse applications. They are available in different sizes and are installed quickly and easily on the floor, without requiring the help of a specialized technician.

It is small, compact and stainless steel.

The small Getecha can mount the fall of the extrusionadora well. Ideal for granular small lost heads or waste. Also for laboratory applications.

It is compact construction and saves space (reduced surface placement, height of building very low, so small that fits any extruder).

It is also suitable for 'clean room' and virtually maintenance-free. The large mouth entrance and then direct to the inclined rotor is first take. There were crushed uniform and reliably any material crushing. The GRS film pass immediately to full service.

The concept of the XS series is designed for integration into measurement of extrusion lines as well as for basic applications in extrusion of pipes and profiles. KME 45 XS and KME 60 XS, it is possible to cover the full range of technical applications in extrusion of pipes and profiles, in addition to serving perfectly for applications of co-extrusion. Their main technical data were taken from the series of extrusion machines from the main line of KraussMaffei Berstorff. To ensure greater security in the process, the extruders single XS are equipped with the same control system C5 with all standard Krauss Maffei Berstorff extrusion lines in all their extrusion machines.

The modules CX platform is the basis of a highly flexible series allowing you a profitable fabrication by moulding by injection. Simple adaptation to your demands and production processes is the most prominent feature of the series CX. Krauss-Maffei offers a range of products with different designs which takes into account the requirements and specific developments in the various sectors and its products.

Krauss-Maffei offers a specific solution of product for the processing of thermoplastics, duroplásticos and polyester.

Unit locking cantilever to create free space on the production: the proven technique of two plates reduced the length of the unit's closure by 30 percent against other concepts.

KraussMaffei AX mit LRX: the machine completely electric fuel transfer of the AX series of KraussMaffei as production cell complete with integrated KraussMaffei linear robot

For the first time in Equiplast, the company presents the new series AX, efficient from the energy point of view and with a good price. In addition, KraussMaffei also shows the ClassiX series machine.

New series electric AX: up to 60 percent more in energy efficiency and a 25 per cent less in need of production completely automatic and totally closed cells space, the new AX series of injectors KraussMaffei visibly reduces costs of production for standard applications. The machine completely electric fuel transfer with forces closure of 500 to 3,500 kN combines proven mechanics of knee with a great ease of use. At the time that costs are reduced for cycle lower purchase costs and times of change of equipment. With the KraussMaffei AX it widens its range of solutions with an electrical standard series which rounds out the range of products in the lower segment impeccable way.

As a production cell complete with linear robot integrated KraussMaffei, really close machine reduces the need for space including the fencing of security by 25 percent. In the Equiplast an AX 100-380 will produce regulatory buttons for electric kitchen in combination with the robot LRX-50. The user-friendly touch MC5 KraussMaffei command coordinates various functions of machine and automation with Bus strand-Ethernet in real time. This simplifies the management as well as the comprehensive diagnosis of all machine functions and increases the safety for the operator and the machine.

The Equiplast also you can see a CX 80-380 ClassiX with a linear autonomous robot LRX-S 50 producing caps thread of PP with product protection for medical applications. Earplugs are a special additive that makes possible an easy but invisible verification of origin, making it difficult to product piracy.