Genebre, S.A. - Retention valves
Genebre RE-GE Plus
Valve of retention: apt for all type of industrial installations, pneumatics, hydraulics, of heating, etc
The valve of retention (3121) Genebre has of improvements with regard to the existent in the market since, the valve monobloque, avoids external escapes. Besides the removable valve, allows replacement of internal elements. It has of a board NBR vulcanizada on the disk, that avoids his detachment. Besides the opening pressesure is regulable, this allows a reduction until 50% of the initial value.
The valve of retention RE-GE Plus (3122) has of better with regard to the RE-GE. Consistent in the elimination of the upper nerve, what makes possible the decrease noises and turbulences. It possesses hydrodynamic internal geometry, that improves the fluidity and avoids turbulences. Besides that the body and internal elements with electrolytic coating of chromium, allow the protection against the corrosion avoiding his deterioration.
They are of construction in brass according to Norma JOINS-IN 12165. With extreme thread female gas as ISO 228/1.
Between his technical characteristics stand out:
The maximum temperature of operation: Air: -20 °C to 110 °C; gas: -20 °C to 60 °C; Water or oil: 0 °C to 90 °C
- opening Fast-acting with a minimum pressesure of 0,04 bar.
- Apt for all type of industrial installations, pneumatics, hydraulics, of heating, of oil, etc.
- Setting multiposicional (horizontal, vertical and oblicuo).
- Together clapeta NBR.
The valve of retention RE-GE Plus (3122) has of better with regard to the RE-GE. Consistent in the elimination of the upper nerve, what makes possible the decrease noises and turbulences. It possesses hydrodynamic internal geometry, that improves the fluidity and avoids turbulences. Besides that the body and internal elements with electrolytic coating of chromium, allow the protection against the corrosion avoiding his deterioration.
They are of construction in brass according to Norma JOINS-IN 12165. With extreme thread female gas as ISO 228/1.
Between his technical characteristics stand out:
The maximum temperature of operation: Air: -20 °C to 110 °C; gas: -20 °C to 60 °C; Water or oil: 0 °C to 90 °C
- opening Fast-acting with a minimum pressesure of 0,04 bar.
- Apt for all type of industrial installations, pneumatics, hydraulics, of heating, of oil, etc.
- Setting multiposicional (horizontal, vertical and oblicuo).
- Together clapeta NBR.
