Fluke Adds two models to his range of ScopeMeters in colour. In addition to a function of comprobación of the state of the industrial buses, the 225C (200 MHz, 2,5 GS/s) and 215C (100 MHz, 1 GS/s) include all the characteristics of the series 199C of ScopeMeters in colour of Fluke. The 225C and the 215C of Fluke are headed to the specialists in maintenance that treat with buses, networks and industrial electronic systems. They check the quality of the electrical signal of the industrial buses as for example Profibus, Foundation, Modbus, CAN-bus, RS-485, etc. The instruments include on the one hand an easy validation of the signal verifying his different parameters of the signal and on the other hand, floating entrances and totally isolated to realise measurements of differential signals. They allow to the users check the electrical integrity of the connections of bus and network by means of comprobaciones of the physical layer that will provide him a fast and comfortable answer. The equipment 225C and 215C of Fluke can validate the quality of the so prompt signal like the electrical signals go through the network, without observing the content of the data. They help to find errors, like connections of wrong cables, defective contacts, connections to wrong earth and terminadores absent or no necessary.
The channels with isolated entrances of independent form and floating entrances involve that the ScopeMeters can take true floating differential measures of systems to 2 threads balanced, like RS-485 and CAN. A channel of entrance can measure the tension between two cables of signal and the another can measure, at the same time and independently, the tension of common way in regard to earth.