Imcoinsa 1985, S.L. - Ingleteadoras
Imcoinsa OF1
Miter cutting: diamond disc
Diamond wheel cutting miter machine model Imcoinsa OF1 has been made and adapted to meet the needs of fast cutting of any materials. You can cut from tiles to bricks, stone, refractory, etc.
This machine is equipped with electric motor with degree of protection IP55, direct transmission. It offers the hand-fed truck support material that supports in sealed bearings.
The progressive adjustment of cutting height is with manual control and cuts up to 45 ° and 360 ° adjustable bracket. The base is in steel plate and allows the recovery of recyclable water by means of an electric pump.
It also has a magneto-thermal switch with coil undervoltage and emergency stop command. Supplied with cover of discs, including the side.
The motor is single phase 3 HP, 230 V and 50 Hz. The maximum diameter of the disc is 350 mm, while the inside diameter is 25.4 mm. The maximum depth of cut that allows is 115 mm, with a maximum of 720 mm cutting length The passage between disc and column is 650 mm.
The capacity of the water tank is 60 l, weighs 82 kg and its dimensions are of 1,100 x 650 x 800 mm.
This machine is equipped with electric motor with degree of protection IP55, direct transmission. It offers the hand-fed truck support material that supports in sealed bearings.
The progressive adjustment of cutting height is with manual control and cuts up to 45 ° and 360 ° adjustable bracket. The base is in steel plate and allows the recovery of recyclable water by means of an electric pump.
It also has a magneto-thermal switch with coil undervoltage and emergency stop command. Supplied with cover of discs, including the side.
The motor is single phase 3 HP, 230 V and 50 Hz. The maximum diameter of the disc is 350 mm, while the inside diameter is 25.4 mm. The maximum depth of cut that allows is 115 mm, with a maximum of 720 mm cutting length The passage between disc and column is 650 mm.
The capacity of the water tank is 60 l, weighs 82 kg and its dimensions are of 1,100 x 650 x 800 mm.
