GS tècnic periféricos y componentes, S.L. (Gstècnic) - Atemperadores para moldes
Industrial Frigo Serie TWP-WTP
Thermoregulation plants: with pressurized water
Plants of thermoregulation with pressurized water in the Twp-wtp series with maximum service temperature of + 180 ° C, have been projected to winterize moulds and cylinders for various industrial processes in particular in the sector of plastic, pressure casting and foundry.
These essentially built by: • circuit heating with electric resistances of the type shielded with large surface (Version g) gas burner or Exchange.
• The heating elements with static groups of power (increased efficiency, reliability, lower noise level and no wear on the contactors).
• Cooling circuit with Exchange of high-efficiency (D-DP-S-SM) • solenoid valve for cooling.
• Centrifugal pump of water recirculation • pressurization pump (versions to 160 - 180 ° C).
• Stainless steel tank.
• Auto function cooling • preheating with timer function (optional for 140 - 160 ° C).
• Auto purge function.
• Control Panel with electronic instrument with microprocessor for the control of the temperature with both heating and cooling PID type regulation.
• Chassis with wheels.
• RS485 serial communication with Modbus (optional) Protocol.
• Kit with external probe with thermostat (optional) • accessories available: interception valves, manifolds with various supplies and returns, connection tubes coated with stainless steel braid and insulated with fiberglass and rubber silicone.
These essentially built by: • circuit heating with electric resistances of the type shielded with large surface (Version g) gas burner or Exchange.
• The heating elements with static groups of power (increased efficiency, reliability, lower noise level and no wear on the contactors).
• Cooling circuit with Exchange of high-efficiency (D-DP-S-SM) • solenoid valve for cooling.
• Centrifugal pump of water recirculation • pressurization pump (versions to 160 - 180 ° C).
• Stainless steel tank.
• Auto function cooling • preheating with timer function (optional for 140 - 160 ° C).
• Auto purge function.
• Control Panel with electronic instrument with microprocessor for the control of the temperature with both heating and cooling PID type regulation.
• Chassis with wheels.
• RS485 serial communication with Modbus (optional) Protocol.
• Kit with external probe with thermostat (optional) • accessories available: interception valves, manifolds with various supplies and returns, connection tubes coated with stainless steel braid and insulated with fiberglass and rubber silicone.
