Durán Electrónica, S.L. - Gas detectors
Duran Electrónica Standgas HC Pro
Self-contained detectors for explosive gas pellistor - relay: detection range from 0 to 100% L.E.L
Standgas HC Pro is the detector relay provided with autonomous by catalytic technology for the detection of explosive gases.
Stand-alone operation: does not require central.
Available gases: methane, natural gas, butane-propane, hydrogen, heptane, hexane, pentane, methanol, styrene, ethane, ethanol, ethylene, propylene, acetone, ammonia, cyclohexane, cyclopentane, diethyl ether, butyl acetate, ethyl acetate, acetic acid, isobutyl alcohol, isopropyl alcohol, Dean, benzene, octane, methyl ethyl ketone, - butanone-, nonane, propanol, toluene, xylene, kerosene. Check availability for other gases.
Allows automatic selection of the gas to be detected from any of available gases, using established protocol with a jumper-optical indication of States and fault of sensor-optical States indication and sensor.averia of sensor fault.
-1 output relay 2 programmable alarm levels (20% LEL / 50% LEL), instant/retarded disconnection, programming delay disconnection and initial relay idle state.
-Power 10V to 30V DC - Sensor and compensator in encapsulated independent ensuring a greater linearity and stability.
-Sintered filter detector.
-Calibrated at factory with gas pattern. They do not need to be recalibrated in the installation.
-Simple verification and maintenance operations by an only operator.
-Resistant (HDMS) silicone vapors.
Stand-alone operation: does not require central.
Available gases: methane, natural gas, butane-propane, hydrogen, heptane, hexane, pentane, methanol, styrene, ethane, ethanol, ethylene, propylene, acetone, ammonia, cyclohexane, cyclopentane, diethyl ether, butyl acetate, ethyl acetate, acetic acid, isobutyl alcohol, isopropyl alcohol, Dean, benzene, octane, methyl ethyl ketone, - butanone-, nonane, propanol, toluene, xylene, kerosene. Check availability for other gases.
Allows automatic selection of the gas to be detected from any of available gases, using established protocol with a jumper-optical indication of States and fault of sensor-optical States indication and sensor.averia of sensor fault.
-1 output relay 2 programmable alarm levels (20% LEL / 50% LEL), instant/retarded disconnection, programming delay disconnection and initial relay idle state.
-Power 10V to 30V DC - Sensor and compensator in encapsulated independent ensuring a greater linearity and stability.
-Sintered filter detector.
-Calibrated at factory with gas pattern. They do not need to be recalibrated in the installation.
-Simple verification and maintenance operations by an only operator.
-Resistant (HDMS) silicone vapors.
