Lastetxe Group, S.L. - Other machines for pipes and profiles
MF3-25
Milling of terminals of pipes: powerful machining chip
The device serves to prepare and shape the terminals of tubes, joints and gatherers weld bead. Though lightweight, the design of the portable device is very robust. Because one person can handle it, it is ideal for workshop works for both works. The extremely compact design also allows easy handling in confined spaces. With its high speed of operation and the speed with which it can use economic finishes can be achieved.
-Exterior tube diameter of 20 to 63.5 mm - minimum 12.5 mm tube inside diameter - thickness of the pipe wall up to maximum of 15 mm - 25 mm head race - I, V-shaped welding seam or special - minimum width of the opening in the wall of 56 mm membrane - manual feed - pneumatic gear Motor: power 740 W 6 bar. Working pressure of 6 to 7 bar. Air consumption of 0.96 m3 / min. Connection of air compressed r 1/4 "- electric gear Motor: with speed regulation. Power absorbed 1200 W with 230 V - 50 Hz - 8.8 kg approximate pneumatic weight - weight with approximate electrical drive of 10.3 kg in addition to the conventional design, in which the motor and spindle braking are aligned in the same direction, the device can be supplied with a drive without coil if so required. This may also be used in special situations that require a total length of design specially reduced.
-Exterior tube diameter of 20 to 63.5 mm - minimum 12.5 mm tube inside diameter - thickness of the pipe wall up to maximum of 15 mm - 25 mm head race - I, V-shaped welding seam or special - minimum width of the opening in the wall of 56 mm membrane - manual feed - pneumatic gear Motor: power 740 W 6 bar. Working pressure of 6 to 7 bar. Air consumption of 0.96 m3 / min. Connection of air compressed r 1/4 "- electric gear Motor: with speed regulation. Power absorbed 1200 W with 230 V - 50 Hz - 8.8 kg approximate pneumatic weight - weight with approximate electrical drive of 10.3 kg in addition to the conventional design, in which the motor and spindle braking are aligned in the same direction, the device can be supplied with a drive without coil if so required. This may also be used in special situations that require a total length of design specially reduced.
