Lastetxe Group, S.L. - Other machines for pipes and profiles
MF 4
Milling of terminals of pipes: powerful machining chip
The device serves to prepare and shape the terminals of tubes, joints and gatherers weld bead. Though lightweight, the design of the portable device is very robust. Thanks to the fact that one person can handle it, it is ideal both for workshop works and works. The extremely compact design allows for easy handling, also in small spaces. With its high speed of operation and the speed with which it can use economic finishes can be achieved.
-Exterior tube diameter of 38 to 133 mm - internal diameter of minimum 26 mm tube - wall thickness up to maximum 25 mm - stroke of 15 mm head - tube welding I, V-shaped seam or special - minimum width of 80 mm membrane wall opening - manual feed - pneumatic gear Motor: power 740 W 6 bar. Working pressure of 6 to 7 bar. Air consumption of 0.96 m3 / min. Connection of air compressed r 1/4 "- electric gear Motor: with speed regulation. Power absorbed 1200 W with 230 V - 50 Hz - approximately 13 kg pneumatic weight - weight with electric drive approx 14.5 kg in addition to conventional design, in which the motor and spindle braking are aligned in the same direction, the device can be supplied with a drive without coil if so required. This may also be used in special situations that require a total length of design specially reduced.
-Exterior tube diameter of 38 to 133 mm - internal diameter of minimum 26 mm tube - wall thickness up to maximum 25 mm - stroke of 15 mm head - tube welding I, V-shaped seam or special - minimum width of 80 mm membrane wall opening - manual feed - pneumatic gear Motor: power 740 W 6 bar. Working pressure of 6 to 7 bar. Air consumption of 0.96 m3 / min. Connection of air compressed r 1/4 "- electric gear Motor: with speed regulation. Power absorbed 1200 W with 230 V - 50 Hz - approximately 13 kg pneumatic weight - weight with electric drive approx 14.5 kg in addition to conventional design, in which the motor and spindle braking are aligned in the same direction, the device can be supplied with a drive without coil if so required. This may also be used in special situations that require a total length of design specially reduced.
