Este artículo fue escrito originalmente en Spanish. Se ha traducido automáticamente para su comodidad. Se han hecho esfuerzos razonables para proporcionar una traducción precisa; sin embargo, ninguna traducción automática es perfecta, ni es su intención la de sustituir a un traductor humano. El artículo original en Spanish puede verlo en Picursa expone en FIMA su nueva trituradora Ricla-Fruit
The new model of crusher Ricla-Fruit of Picursa is apt for grass and branches until 6-8 cm. The novelty is that the machine incorporates a system of sinfín hydraulics whose purpose is to deposit all the material triturado on the strain of the tree. The main aim is to keep the humidity in the root in addition to drowning the earth so that it do not go out grass in the strain. This model is apt for plantations frutales and plantations in espaldera as it can be the vineyard and the olivo.
Besides incorporates an upper gate that has two positions. The first is so that the material access to the sinfín whereas the second position is to be able to use the machine like a normal crusher, so that the material falls directly to the floor.
The crusher Ricla-Fruit stands out by his operation, since it realizar a good triturado with low absorption of power, and by the robustness that prints the mark Picursa in all his products.
The width of work goes of 1,6 to 2 metres; the transmission is of power by means of pulleys and belts in fibre of Kevlar; and the rotor of 160 mm and thickness of 15 mm. It has supports of hammers cementados; patterned hammers Picursa; taking of strength of 540 rpm; hydraulics engine in gears; and a rulo rear for control of height.
En el actual ciclo histórico de transformación en el umbral de la cuarta revolución industrial, algunas empresas están haciendo un uso intensivo de la tecnología de plataformas
