Claas Plants in Demoagro with a complete variety of machinery for the siega, treatment and recolección of forraje

Claas attends to Demoagro as it marks specialist in recolección. Specifically, it will have a wide space in the zone Demorrecolección, with a complete variety of machinery –as well as tractor trucks– for the siega, treatment and recolección of forraje. The signature will show the provision and the technology of his products for the obtaining of a forraje with the highest quality.

Claas Presents in Demoagro the segadora Disk 3500 FRC, with bar of cut of 3,40 m, composed by 8 disks and two blades by disk with fast change with help of so only a crowbar. It presents adaptation to the floor profil 3D, with a point of longitudinal twist in the most next zone to the floor (stick of the bar of the cut to the main frame), and side with the bulón of stick of the main frame to the frame of stick with the tractor.

His conditioner of rollers accionado by belt directly to the inferior roller and by drag the upper (does that they always go synchronised in his work of conditioned) prepares the material for the dried accelerated of the forraje type leguminosas (lucerne, veza, peas, yeros, etc…) bending the tallos and the leaves, but without that there is loss of these last. The machine carries mounted an optional system of hydropneumatics suspension controlled from the cabin of the tractor through a hydraulics distributor, what allows anytime of the work + adjust the pressesure of aligeramiento in front of situations cambiantes of terrain.

Segadora Disk.

The segadora rear Disk 3500 RC carries the same bar of cut, conditioner and hydraulics suspension that the segadora frontal. It treats of the ideal group with the frontal to do some 6,20-6,40 m of width of work with the advantage of segar entirely coverages between aspersores of 18 m. The segadora folds until in 115º in his position of transport, without projecting of the plant of the tractor except the tripuntal of stick of the machine.

Neither they are missing to the appointment of Demoagro the henificador Volto 52, of 4 rotors and 6 arms, than scatter a width of work of 5,20 m. The accionamiento does through a TDF of 540 rpm and the transmission of movement between the rotors realises by the gear of fingers Permalink.

In hileradores the leadership has it the Liner 500, with 4,80 m of width of rastrillado composed by a rotor and 14 arms portapúas Profix with multiestriado, what delivers the sharp efforts between groove them of the union. It goes mounted on an axis tandem with 4 wheels, to the that optionally can him increase with 2 wheels more. It possesses the bar of download CKL with what limits the possible balanceos on the tractor in position of transport.

Picadora Of forraje Jaguar.

It crashes in the section of 'Treatment' is definitely the picadora of forraje Jaguar 960 + 300 PRO, instrumented with Engine Mercedes-Benz OM 502 with 8 cylinders and 653 CV of power, that fulfils with the normative Phase IIIb thanks to the system SCR for the reduction of harmful gases with the employment of urea like agent reductor. The double hydrostatic traction with distribution of the effort between the leading axles and backsides, ensures a correct work independently of the conditions of the floor.

Likewise comes instrumented with a drum picador of 36 blades willing curves in V, ensuring some lengths of cut from 3,5 until 12,5 mm (with the complete game of blades). Later, the machine goes endowed of a device cascador of grains Corn Cracker MCC 100/125 teeth with a differential speed of 30%. The thrower has adjust electrical of the crack of exit of the material, being able to vary the scope from the cabin. The tube of download carries mounted the system Optifill of adjust automatic of the capota deflectora for a uniform distribution of the material on the trailer anejo during the work of hammered.

The PU 300 PRO with 3,00 m of width of work collects the hileras of forraje without leaving existences in floor thanks to his 4 hileras of quills and route of levy special. Wheels pivotantes with folded manual and the optional of the wheel palpadora head office do that the follow-up to the floor was perfect and avoid pollutions of the material by dust, earth or sand.

The empacadora Quadrant 3300 is the machine that Claas presents in Demoagro for the empacado of big bullets, with pick up of 2,35 m of width of collected, rollers dosificadores and wheels palpadoras pneumatics pivotantes. The system of feeding comes conformed by the system PFS that combines a screw sinfín with álabes in the extremes with a game of palettes in the centre of the axis, guaranteeing a uniform feeding was cual was the material and quantity of east to process. Later, it locates the precámara hydraulics selectable in three positions and with detector of overloads in the acarreador in case of atasco. The camera of empacado of 120 x 90 cm has two games of retenedores to each side and generates bales with lengths from 50 cm until 300 cm.

The machine can be instrumented with simple axis or tandem or steeringal tandem, with an endowment of maximum wheels of 710/40R22.5 for simple axis and 620/50-22.5 for axis tandem. The machine controls and handles through the terminal Isobus Claas Communicator, with the possibility to explain optionally with sensor of bales fallen or with sensor of humidity.

Empacadora Quadrant 3300.

Neither lacking in the field burgalés the rotoempacadora Variant 360, of variable camera with 4 stravel sinfín, with Pick Up of 2.10 rotor feeder, kit of ensilado and soft core regulable so much in size as in density. The variable camera conforms some bales with diameters from 0,90 m until 1,55 by 1,20 m of width, and is controlled directly through the control Isobus Claas Communicator, where also carries installed the provision of the left indication-right of load of the machine. The system of tied of thread and mesh is automatic.