Schlüter Systems, S.L. - End profiles
Schlüter Designline
Nosings and finish: for the design of ceramic coatings
Schlüter-Designline Is a profile of cenefa for the design of ceramic coatings in inner walls. This range of profiles can combine with the profiles of nosing Schlüter-Rondec for the external singings of the walls.
Schlüter-Designline Has a visible width of 25 mm and a lateral thickness of 6 mm. Of this way can combine the profile with baldosas with a minimum thickness of 6 mm. In the case to place baldosas with an upper thickness has to fill up the profile with cement tail.
Schlüter-Designline Manufactures in a big variety of materials and finishings. Has to check the idoneidad of the type of material according to the chemical aggressions and/or planned mechanics.
Schlüter-Designline-MC is especially ideal for coatings, as for example in combination with the grifería cromada in bathrooms. The visible surfaces have to protect of abrasions. Has to delete of immediate form rests of mortar of rejuntado or cement-tail.
Schlüter-Designline-And /-EB are manufactured in a stainless steel of the quality 1.4301 (V2To) and especially ideal for zones with high mechanical and chemical aggressions. Thus it is possible the placing of this profile in floors.
Schlüter-Designline-AE/-ACG/-ACGB/ -AM/-AMG/-AMGB/-AK/-AKG/-AKGB/ -AT/-ATG/-ATGB: By his layer anodizada the aluminium presents a surface refinada, that in normal circumstances of use does not experience changes. The visible surfaces have to protect of abrasions. The aluminium is sensitive to alcaline means.
Schlüter-Designline Has a visible width of 25 mm and a lateral thickness of 6 mm. Of this way can combine the profile with baldosas with a minimum thickness of 6 mm. In the case to place baldosas with an upper thickness has to fill up the profile with cement tail.
Schlüter-Designline Manufactures in a big variety of materials and finishings. Has to check the idoneidad of the type of material according to the chemical aggressions and/or planned mechanics.
Schlüter-Designline-MC is especially ideal for coatings, as for example in combination with the grifería cromada in bathrooms. The visible surfaces have to protect of abrasions. Has to delete of immediate form rests of mortar of rejuntado or cement-tail.
Schlüter-Designline-And /-EB are manufactured in a stainless steel of the quality 1.4301 (V2To) and especially ideal for zones with high mechanical and chemical aggressions. Thus it is possible the placing of this profile in floors.
Schlüter-Designline-AE/-ACG/-ACGB/ -AM/-AMG/-AMGB/-AK/-AKG/-AKGB/ -AT/-ATG/-ATGB: By his layer anodizada the aluminium presents a surface refinada, that in normal circumstances of use does not experience changes. The visible surfaces have to protect of abrasions. The aluminium is sensitive to alcaline means.
