Hasco Ibérica Normalizados, S.L.U. - Mould temperature controllers
Hasco Techni Shot
Hot runner nozzles: lengths of 100 and 125 mm are available
The Techni Shot hot runner nozzles program has expanded with torpedo tips open for applications from end of needle.All ranges of drop-outs, working materials, and bolt-on front covers are available for these nozzles.All ranges of drop-outs, working materials, and bolt-on front covers are available for these nozzles.These nozzles are available all ranges of drop-outs, work materials and covers front atornillables.e work and bolt-on front covers. This allows you to combine an optimum heat conduction in the cutting area with excellent resistance against abrasive wear, even for plastics with high content of material.
The number of nozzles has type 20 size, designed for weights smaller stroke and small distances between cavity. A surface of sealing defined in the union nuts offers low heat transfer.
Particular attention to the ease of maintenance, guaranteed by the possibility of replacement of parts such as resistance, thermocouple, nozzle bodies, dropouts and front covers has been paid.
Taking constructive steps, change the thermocouple without removing the toe of the nozzle can be performed. Thus, significantly minimizing maintenance. The nozzle is suitable for all fields of application, especially for technical and reinforced plastics.
This heater offers a uniform distribution of temperature, resulting in a profile of homogeneous heat along all the casting channel. The proper location of the thermocouple at the tip of the nozzle and the isolation of titanium Gets a precise temperature regulation, so that you can also work in a secure manner with technical plastics with reduced thermal ranges.
The number of nozzles has type 20 size, designed for weights smaller stroke and small distances between cavity. A surface of sealing defined in the union nuts offers low heat transfer.
Particular attention to the ease of maintenance, guaranteed by the possibility of replacement of parts such as resistance, thermocouple, nozzle bodies, dropouts and front covers has been paid.
Taking constructive steps, change the thermocouple without removing the toe of the nozzle can be performed. Thus, significantly minimizing maintenance. The nozzle is suitable for all fields of application, especially for technical and reinforced plastics.
This heater offers a uniform distribution of temperature, resulting in a profile of homogeneous heat along all the casting channel. The proper location of the thermocouple at the tip of the nozzle and the isolation of titanium Gets a precise temperature regulation, so that you can also work in a secure manner with technical plastics with reduced thermal ranges.
