ENTREVISTA 26 Drill rig Drilled accepted meters (m) Engine hours (hh:mm) Drilling time (hh:mm) Number of accepted holes (pcs) Average drilling utilisation (%) Avg lenght of accepted holes (m) Avg drilling time per accepted hole (min) Avg penetration speed accepted (m/min) Drilled accepted meters/ engine hour (m/h) Total fuel used (l) Avg fuel consumption per hour (l/h) Avg fuel consumption per accepted meter (l/m) Avg fuel consumption peraccepted hole (l/pcs) 9/17/2021 67013 256 7:36 3:16 15 43,0 17,1 13,1 1,31 33,7 232 30,5 0,91 15,5 Total 256 7:36 3:16 15 43 17,1 13,1 1,31 33,7 232 30,5 0,91 15,5 9/17/2021 67013 203 7:24 2:32 18 34,2 11,3 8,4 1,34 27,4 220 29,7 1,08 12,2 Total 203 7:24 2:32 18 34,2 11,3 8,4 1,34 27,4 220 29,7 1,08 12,2 9/17/2021 67013 203 6:21 3:22 13 53,0 15,6 15,5 1,00 32,0 221 34,8 1,09 17,0 Total 203 6:21 3:22 13 53 15,6 15,5 1,00 32,0 221 34,8 1,09 17,0 9/17/2021 67013 346 7:42 3:59 18 51,7 19,2 13,3 1,45 44,9 269 34,9 0,78 14,9 Total 346 7:42 3:59 18 51,7 19,2 13,3 1,45 44,9 269 34,9 0,78 14,9 9/17/2021 67013 334 7:27 3:47 18 50,8 18,6 12,6 1,47 44,8 242 32,5 0,72 13,4 Total 334 7:27 3:47 18 50,8 18,6 12,6 1,47 44,8 242 32,5 0,72 13,4 Grand total 1342 36:30 16:56 82 46,4 16,4 12,4 1,32 36,8 1184 32,4 0,88 14,4 TECHNICAL DATA DI450 DI550 DI560 Recommended hole diameter 90-130 mm 3 1/2" - 5 1/8" 90 - 165 mm 3 1/2" - 6 1/2" 90 - 165 mm 3 1/2" - 6 1/2" Drill pipe/tube diameter 76,89 and 102 mm 3", 3 1/2" and 4" 76,89, 102 and 114 mm 3", 3 1/2", 4" and 4 1/2" 76, 89, 102 and 114 mm 3", 3 1/2", 4" and 4 1/2" DTH hammer 3", 4" 4", 5" and 6"* 4", 4" HP, 5" and 6"* Engine type Caterpillar C9 Caterpillar C13 Caterpillar C13 Engine output power 261kW / 1 800 rpm 328kW / 1 800 rpm 328 kW / 1 800 rpm Flushing air capacity 18 m3 / min at 24 bar (636 cfm at 348 psi) 24,4 m3 / min at 24 bar (862 cfm at 348 psi) 24,4 m3/min at 24 bar (862 cfm at 348 psi) 21,6 m3/min at 30 bar (763 cfm at 435 psi) Operator cabin HVC550 HVC550 HVC550 Certificate ROPS and FOPS ROPS and FOPS ROPS and FOPS Transport length 12.6 m (41 ft) 12.6 m (41 ft) 12.6 m (41 ft) Transporting Tramming height 3.37 m (11ft) / 3.29 m (11 ft) 3.37 m (11 ft) / 3.29 m (11 ft) 3.37 m (11 ft) / 3.29 m (11 ft) Transporting Tramming width 2.49 m (8.2 ft) 2.49 m (8.2 ft) 2.49 m (8.2 ft) Weight 23 150 kg Tier3 23 370 kg Tier4 23 700 kg Tier3 24 050 kg Tier4 24 050 kg Tier4 BAGES MAQUINARIA I SERVEIS Bages Maquinaria I Serveis, empresa creada en 1995 por su actual director, Josep Puig Riu, es el distribuidor oficial de SMR en Cataluña desde el inicio de sus actividades y ha sido parte fundamental en la venta del equipo Sandvik Leopard DI450 a Osebe. Bages Maquinaria se encarga de ofrecer el servicio post-venta de los equipos de perforación Sandvik en la zona, incluyendo la distribución de herramientas de perforación Sandvik. RENDIMIENTOS DE LA LEOPARD DI450 CON MARTILLO DE 4” Y DIÁMETRO PERFORACIÓN 115 MM * Only in special conditions: 6" DTH-hammer limited max. 20 bar air pressure/DIN1343 DIN1343: pressure=1.01325 bars, air humidity=0%, temperature=0°C
RkJQdWJsaXNoZXIy Njg1MjYx