This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at La amplia confortabilidad, característica destacada de las nuevas placas calefactadas de Rotecna
The new hydraulics plates work like an accumulator of heat
The wide confortabilidad, characteristic stood out of the new plates calefactadas of Rotecna
Editorial Interempresas30/03/2012
30 March 2012
The new hydraulics plates work like an accumulator of heat. The water of the circuit of the boiler (through a metallic tube in the interior of the plate) heats the volume of water that contains the plate, what provides a thermal sensors inertia. And it is this inertia the one who keeps always to the same temperature the surface of the plate, avoiding beaks of temperature. With these advances that Rotecna has conferred to these three plates calefactadas, together with the tools for his complete installation confer them an optimum performance.
The internal circuit with which have designed also has the advantage that his operation does not affect to other plates, as the plates are independent. Therefore, his functionality is guaranteeed.
Operation
The new plates with enclosed internal circuit connect directly to the circuit of distribution of the heating. By this reason, his operation so only will depend on the installation of the conventional heating of the exploitation. Of this way, by a part, his regulation will realise by means of the standard installation of heating. And on the other hand, also important, any incidence so only will have an origin, by what in case of a bad operation the solution will be easier to find.
Characteristics
Between the characteristics of these new plates, fits to stand out the easy filled of water from the top of the plate, through the cap 'non-air'. Besides, the connections of the tubes are of 15 mm and the central body of the plate is not fixed in the sides, by what allows a dilatation when this heats .
On the other hand, in the design, very robust, also has taken into account that the inferior part mount with insulator to minimise the thermal sensors losses. Besides, it has the support 'outdirt' (without dirt) that avoids that the dirt accumulate and therefore, is easier to clean. The surface of the plate has a special relief antideslizante that provides a good hold and greater confortabilidad like area of rest for the lechones.
The three versions, with length of 1.200 mm and amplitude of 400, 500 and 600 mm, allow can do a lot of combinations. It saves in setting and in connections between plates, since with one is sufficient in standard settings squares for mothers. In the case of his amplitude, allows several possibilities according to the needs of each square and farmyards of destete or 'wean to finish'.
Related Companies or Entities
Rotecna, S.A.
