This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Fendt presenta en FIMA las imponentes series 800 y 900 Fase 4

Ver más artículos sobre: FIMA 2014: all the novelties of a glimpse

Pavilion 6, street B-C

Fendt Presents in FIMA the imponentes series 800 and 900 Phase 4

Editorial Interempresas24/01/2014

Fendt disembarks once again in the Aragonese capital with a big quantity of novelties directed to help to a professional agriculturalist to look for the maximum expressesion in efficiency and productivity. In tractors the big leading are the new series 800 and 900 Phase 4 final, whereas it neither has been missing the recognition to two big developments of the multinational: the hydraulics attachment in tractors Flatface and the system of regulation of pressesure VarioGrip.

The arrival of the 2014 supposes a new jump regarding rule of reduction of broadcasts refers . The first models of Fendt in adapting to said normative are the new series 800 and 900. Of the series 800 keep the 4 existent models in the previous series (822, 824, 826 and 828) with nominal power (EC 97/68) comprised between the 226 and the 287 CV of nominal power. Regarding the series 900 SCR has reduced of 6 to 5 models (927, 930, 933, 936 and 939) with a nominal power (EC 97/68) of 275 to 396 CV. Both series come with a concept of new engine that aúna the efficient technology SCR with a passive filter of particles diesel CSF. The filter of particles is free of maintenance and does not need to inject fuel for the realisation of the process of regeneration of the filter.

The new engine mounts two turbocompressesors intercalados with two intercooler to refrigerate the gases of leakage. Thanks to the new system achieves enter a greater volume of air in the combustion, that improves the performance and generates greater power to lower revolutions and a curve of pair more uniform. Now the curve of power is more homogénea in the stretch of 1.800-2.200 rpm, achieving the same power in all the stretch and coinciding therefore the maximum power with the nominal.

The new models have diverse innovations that mark the difference in visibility, ergonomics and hygiene as they are the lights ‘coming home', the windscreen of accionamiento of 300º, the glass laminado of hygiene in the windscreen, the incorporation of the system of telemetry Agcommand and other new functions of the terminal Variotronic like the way night. Some novelties will be available in the models 500 SCR and 700 SCR.

The innovation of Fendt receives a recognition deserved

But no only the tractor in if same is the protagonist in FIMA, also is the technology of avant-garde that Fendt develops to offer to the algricultor professional machines more efficient. Have, for example, the new system of autoguiado of Fendt, designed for small and average exploitations with need to optimise resources without investing big quantities of money. The system VarioGuide Light, incorporated in the terminal of 7", has the possibility to realizar works with the autoguiado, with the signal of correction Egnos, with a dynamic precision of until ±20 cm.

Special recocimiento, with a Technical Novelty FIMA 2014, has received the hydraulics attachment Flatflace. At present the possibilities of connection by means of the hydraulics system of the tractor are enormous, exist quite a lot of types and sizes of distinct attachment. Fendt Has designed this new block of hydraulics attachments that achieves aunar in an only different block types and sizes of attachment. The connection realizar of fast and simple way even with the hydraulics attachment under pressesure, besides the flat face of the block favours the prevention of losses of pressesure and escapes of oil. The solution has been developed entirely by Fendt and the attachment is designed for discharges of until 75 l/min and attachments of 1/2", 3/4“and 5/8”, on the other hand, the maintenance is very comfortable of face to the user.

Hydraulics attachment Flatflace, developed entirely by Fendt.

The pressesure of the tyres is also a factor that influences of significant way in the global efficiency of the tractor. The most employed solution to day of today is a commitment between the needs of field and the ones of transport, being therefore the less bad “option” of global way but moved away of the optimum solution and more efficient to individual level for each concrete work, that supposes a different pressesure in each case. With the new system of regulation of pressesures Fendt VarioGrip, also rewarded by as Technical Novelty in FIMA, the problem deletes of root. With the incorporation of a compressesor of big power and through a simple adjust from the terminal Variotronic of the tractor, can regulate , of fast way, precise and without going down of the tractor the pressesure of the tyres by axis at all times. With this saves fuel and generates a lower wear of the tyres in works of transport like consequence of the increase of the pressesure of the tyres in road, and at the same time that it reduces the compactación produced in the floor, increases the power of traction in works of field, thanks to the greater surface of contact with the terrain.

Fendt VarioGrip, the new solution to control the pressesure of the tyre at all times.

The macroempacadora Fendt 1290 XD neither lacking to the appointment

Fendt Has entered in his range of macrobalers the model 1290 XD, able to produce bales of 1,2 x 0,88 m and that shares a lot of common components and very tested in other balers inside the range. The meaning of XD: ‘Extra Density', means that it reaches between a 15 and 20% more than density that the model of empacadora standard Fendt 1290. The new model conserves all those characteristic that his owners and operators sue: simplicity, longevity, greater reliability and greater productivity with some low costs of maintenance.

The empacadora 1290 XD will be available in two configurations: feeding of fork or Packer (N) and feeding of rotor or Cutter (S).