Pavilion 5, stand D/And 25-29
Tatoma: The mezclador vertical of three sinfines MV Triplo, leading in FIGAN 2013
Editorial Interempresas11/03/2013
11 March 2013
The Group Tatoma presents in FIMA Grazier with the mezclador vertical Triplo, a self-propelled, a picadora of straw and, like novelties, a mill-mezclador and an ensiladora-embolsadora.
Between all the machines that presents the Aragonese company stands out the mezclador vertical Triplo, based in a tub troncocónica and three conical propellers vertical that allow to hammer and mix any product. For big capacities, the height of the mezcladores vertical of a sinfín results excessive and is not appropriate in a lot of installations. The use of the three sinfines allows to design a machine of lower height and big capacity, with the same profits of the mixed of the machines of an alone sinfín.
Mezclador Vertical Triplo.
The mixed realises by the effect of the multiple toothed blades of the propellers, that cut the product while this scrolls up and goes back to fall by gravity. The wide range of possibilities of download of this type of mezcladores is one of his big advantages, since they can adapt to any installation. It has in addition to vertical ladders with access by both sides, programmable scale (15 rations, 15 ingredients) and six cells of weighing of 54 mm of diameter. Besides, this model of mezclador has of a team of change of speed with hydraulics control by means of sirgas or a block of electrovalves optional.
The picadora of straw D-600 is another of the leading. The system of hammered of the model D is formed by a turbine with blades surrounded of a rejilla that acts like sieve. In the interior of the same finds a system of hammers that guarantees a hammered upper and more uniform. This model is conceived for his use in farms avícolas and only is recommended for dry straw. They are conceived of a compact and robust form that guarantee a big durability. All the models are instrumented of a rectangular box in whose bottom finds a system of chain and crossbars that approaches the bullet to the system of hammered to speed regulable, and have of two speeds that determine the scope of the download.
The ensiladora ENS-150, productivity ensuredThe picadora and embolsadora of forrajes has a productivity of 20 to 25 t/h. The dimensions of the machine embolsadora are of 4,25 m of length, 3,14 m of total height, 1,72 m of height without the hopper, 2,45 m of total width and 2,1 m of width without hopper. The capacity of the hopper is of 3,5 m3. Type of stock exchange: 1,5 metres. The embolsado realises by means of sinfín and the hammered by means of two toothed rollers. The brake is hydraulics manual and has of hydraulics positioning of rollers. The accionamiento is mechanical by means of transmission cardan and the transmission to sinfín by means of chain or to rollers of hammered by means of belts. The hydraulics system of additives is accionado by means of electrical bomb connected to the battery of the tractor.
Ensiladora ENS-150.
Related Companies or Entities
Tatoma - Ingeniería y Montajes Monzón, S.L.