This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Genebre persigue la máxima fiabilidad con el nuevo sistema de apriete RAC-GESpecially adapted for the Union pipes of polyethylene of low, medium and high density
Genebre seeks the maximum reliability with the new system of torque RAC-GE
Drafting Interempresas14/07/2011
July 14, 2011
After rigorous stress-testing and quality assurance,
Genebre has released its new generation of forged brass fittings RAC-GE system for airtight plastic pipes Union. The new connectors have an external structure that facilitates the installation of the fitting. The renewed system of torque RAC-GE guarantees maximum safety and reliability for the connection of pipes in hidrosanitarias facilities and heating, with working temperatures from - 20 ° C to + 110 ° C. The fittings can be used at different levels of pressure, being the most commonly used with water to a maximum of 16 bar pressure.
The uniqueness and effectiveness of this system of torque lies mainly in the ring of torque. Genebre patented and manufactured in chromed brass, it incorporates a system of fixing points which warrant a subject sure the fitting to the pipe. It also provides the necessary elasticity for easy mounting and dismounting of the accessory.
The system of press RAC-GE has been designed to mount the tube directly in the fitting, if the tube is correctly deburring and does not present a considerable ovalación. However, please continue the operation of coupling tube unmounting the fitting and positioning elements on the pipes in the following order: 1. disassemble the body of the fitting nut and insert it into the tube; 2 Enter the ring in the tube of tightening the cap ring and o-ring, in this order; 3 Put tube with the previous components in the body of the fitting until make it stop; 4. Finally, tighten the nut in the body of the fitting.
New system of torque RAC-GE Genebre.
Quick coupling, and without any specific tools, the new RAC-GE system allows to reduce considerably the time of Union racor-tubería, which ensures greater competitiveness for the professional and increasing the profitability of each project. The system consists of a complete range of accessories that solve any need of installing complex to be, while ensuring a high resistance and total sealing: straight fitting, elbows, and tees, in its different versions, male, female and links. All references are available from 1/2 "to 4", being of 2½ ", 3" and 4 "with bridada Union.
Genebre performs exhaustive quality controls in all their production processes in order to ensure the highest quality for the customer. In the case of the renewed system of torque RAC-GE, resistance tests are randomly performed on a test bench where being set to the maximum pressure to verify that the component which limits the strength of the installation in any case will be the fitting, but the plastic pipe, without producing any leakage during this process.
Related Companies or Entities