This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Reynaers Aluminium y Ariño Duglass participan en una jornada técnica de aluminio y vidrio en Zaragoza

Reynaers Aluminium and Ariño Duglass participate in a technical Conference of aluminum and glass in Zaragoza

02/03/2011

on March 2, 2011

Saragossa received the past 17 February the technical day ‘Aluminium+glass: strategic Factors of the thermal sensors transmission' for architects in which it participated Reynaers Aluminium and also Ariño Duglass.

The thermal requirements of the technical code (CTE) imposes the use of Windows and doors with high performance in which the aluminium and glass are determining factors. Aluminium with thermal break systems represent the ideal solution going beyond the minimum values required. Reynaers Aluminiumdispone of the appropriate systems and the necessary software tools (tool U) for the calculation of the thermal transmitáncia and the implementation of the supporting cards of CTE.

After the welcome attendees, Francesc Freixes, Reynaers Aluminium projects director, he made a brief presentation of the company and images of some of the emblematic buildings in which participated Reynaers were shown. These include Coca-Cola headquarters in Madrid, the Protos Winery in Peñafiel or the stunning Ferrari World in Abu Dahbi.

The system for passive buildings CS 104 of Reynaers.

Alex Peral, technical director of the company, addressed the issue of the day from the start, going over the different systems of breakage of thermal bridge used in Reynaers systems including high levels of isolation the 86-HI CS and CS 104. The CS 104 is a new solution within the range of products CS, which adds the advantages of insulation values improved below 0.88 W/m²K (UF), which provides Windows and doors suitable for passive buildings.

Subsequently submitted the Reynaers U-tool software, available on-line for architects and specifiers. This tool calculates the thermal values (or) of any type of enclosure whether Windows, doors or curtain walls and provides the direct results to fill the support chips that CTE specifies.

In the second part of the day, Olga Sisques, product manager for Ariño Duglass, made a brief presentation of the company and reviewed the wide range of glass for solar control and/or reinforced thermal insulation that are used by the company.