This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Sistemas para correderas, ahora con ventilación integrada

Available in economy in monorail version, as well as options 2 and 3 lanes

Slides, now with integrated ventilation systems

Drafting Interempresas02/10/2009

October 2, 2009

With the introduction of its new system for sliding doors CP 130, Reynaers replaces its current range TP 138, TP 110 and 110 TLS with "a more advanced system that improves the design and functionality with greater comfort and better isolation".

Reynaers Aluminium, European suppliers of sustainable and innovative aluminum solutions for architecture, launches its new range CP 130 as a complete solution that is fully compatible with profiles and accessories of the 68 CS. The new range, with openings in sliding and corredera-elevable type, offers an economical in monorail version, as well as options 2 and 3 lanes, with a variety of solutions from Union to floor.

The new system, whose leaves and frames can assemble or screws, is designed for a quick and easy mounting and installation

For processors, the compatibility of the 130 COP with the CS 68 system allows you to reuse of profiles and accessories of the 68 CS, including the frame and supports of glass, in other applications with the cost savings involved. At the same time, the new system is designed for a quick and easy mounting and installation. With a single system can be openings in sliding and corredera-elevable, based on the framework of the 68 CS profile. Paper and frames can assemble or screw, considerably simplifying the installation of large enclosures.

Without insulating extras, isolation of 2.90 W/m²K values are achieved with this system.

Compatible with most types of glass

CP 130 allows applications of glass thicker, increasing the limits of the old systems TP 110 (37 mm) and TLS 110 (30 mm) to 42 mm in the range 130 COP. This entails the use of a wider range of types of glass, including glass laminated for greater resistance and acoustic. This greater flexibility with the option of design of narrow crossing, Slim Line variants and narrower profiles, opens up new possibilities for creative applications.

Better insulation

The improvement of the values of isolation (Uf) of up to 2.78 W/m²K (with insulating extras) is in line with those of the system for Windows CS 68 and is achieved by an increase in the depth of the profile, as well as the placement of boards under the glass. Without insulating extras, are reached values of isolation of 2.90 W/m²K.

CP 130 Lift & Slide two guides.

Configuration

A wide range of designs for the framework offers various options for functionality. The possibility of having an integrated lower profile allows a low threshold for slides as correderas-elevables. In addition to offering an economic variant, the narrow frame allows the integration of the verandahs CR 120 system. The corredera-elevable version frameworks provide a clean aesthetic and allow hide drains.

Lift option offers a good tightness for benefits to air/wind/water (AAV) when the road is in closed position. Union framework has been improved to increase the tightness of the water. The gaskets special, instead of the alternative of silicone, also contribute to provide a better sealing water and facilitate mounting. The maximum weight per sheet, both for the sliding version such as corredera-elevable, is 300 kg, 100 more than the current TP 110 range.