The Consortium Termoarcilla presents the new geometries of the block Termoarcilla ECHO
29 May 2012
- Termoarcilla ECHO 1: this geometry is based in the technology of cells ranged like the Termoarcilla traditional. In this case the disposal and size of the celdillas rectangular has been redimensionada and optimised to improve the isolation.
- Termoarcilla ECHO 2: this geometry is based in the technology of cells to the tresbolillo. This geometry difumina the direct steps of flow of heat.
- Termoarcilla ECHO 3: the rhomboidal geometry optimises the form of the celdilla to minimise the conductivity of the inner air. Besides, it has reduced of spectacular form the use of special pieces, being possible to solve with two or even an alone piece joker all the meetings of corner, jambas of the gaps, meetings of walls, etc.
![Imagen](https://img.interempresas.net/fotos/640536.jpeg)
All the range of blocks Termoarcilla can use like structural walls, without more limitation that the one who impose the own structural calculation, and the established in the DB--F. The minimum resistance of a block Termoarcilla is of 10 N/mm2, very upper to the 5 N/mm2 minimum demanded by the CTE for the walls of load, and the minimum thickness of block is of 14 cm, elder to the half foot that demands like minimum thickness of resistant wall.
The solution of wall of load is the optimum structural option in crowd of buildings, and is the best technical alternative and economic when the building is of alone two or three plants. A wall of load of Termoarcilla, deletes the thermal sensors bridges of the pillars, the influence of the thermal sensors bridges of the outline of the gaps is lower, provides a remarkable thermal sensors inertia, and additional acoustic isolation, and allows to have a saving of remarkable costs to the prescindir of the structure porticada.
Besides, the walls of Termoarcilla can arm in the tendeles for those special cases (by exigencias seismic or loads of the terrain) that demand a greater resistance to the flexión or sharp.
In what to acoustic isolation refers , the block Termoarcilla, with the new pieces ECHO, follows keeping the exceptional acoustic provision of always. The factories of Termoarcilla of an alone leaf are englobadas inside the type 1 according to the Option Simplified of the DB-HR. Also it is possible to use them in solutions Type 2 to attain acoustic isolations in situ DnT, To upper to 55 dBA.