This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Rodillos de compactación Imcoinsa con mayor fuerza y menor peso

The vizcaíno manufacturer exhibits in Ferroforma their developments in equipment for construction and industry

Roller compaction Imcoinsa with greater strength and lighter weight

Drafting Interempresas08/03/2011

on March 8, 2011

Imcoinsa attends Ferroforma-Bricoforma 2011 with important new features. At its stand, located in Hall 1, E19-F20, you can see the wide range of screw compressors up to 30 HP, a new range of welding inverter, in addition to the increase in the range in metal cutting tools.

Also Imcoinsa exhibits significant developments in its construction equipment, such as a new range in trays and roller compaction, fratasadora duplex and electronic vibrators of new technology.

New roller compaction for difficult spaces

The new monorrodillos Imcoinsa are suitable for compaction of sand, gravel, stone, surfaces of asphalt, etc. Its small size facilitates its use in areas of difficult access, always guaranteeing highest compaction performance. As a result of its high centrifugal force, use replacing equipment weighing more than is feasible: with the same power of compaction offer a significant improvement in the conditions of work of the operator.

Due to his clutch I centrifugal, allows a comfortable movement of the equipment without the activation of the vibration, by means of a simple system of regulation of the accelerator command. This system also facilitates the boot at low temperatures. In addition, the transmission of hydrostatic type allows progressive control of forward speed.

The auxiliary wheel increases stability and significantly reduces the vibrations transmitted to the operator. In order to ensure the maximum security to the same conditions, the team is equipped with prescribed emergency stop systems integrated into a practical panel of scorecard, which is complemented by a system of brake on the parking lot of the team. The team is available in their versions gasoline and diesel.

With a high centrifugal force, the new Imcoinsa rollers can be used replacing equipment of higher weight.

New Imcoinsa rollers have a frequency of vibration of 75 Hz (4700) and a centrifugal force of 16 Kn, the 2I7216 of gas and 22 Kn model, 2I722 model, diesel. They offer a depth of 300 to 450 mm compaction, a displacement of 0/5 kilometres an hour up front and 0/2.5 reverse. You can save a maximum of 20-25% slope.

Maximum safety in electrical installations

Power Test is an innovative product that allows, in a simple and secure, verify the correct operation of any electrical outlet. Connecting Power Tester to indicate through an intuitive system of luminous pilots the correct situation in the different phases, system neutral and grounding. Always secure the installation manipulation is achieved with this and we will avoid the possible rupture of electric machines as a result of his connection to electrical sockets defective or inadequate. This system is a good alternative to the cumbersome and costly equipment checking traditional, providing maximum security and reliability benefits.

A wide range of activities will be enhanced by the new features offered by the system Power Test Imcoinsa, as the electrical installations of work, the industrial sector, temporary facilities, and fairs and events, and at the household level.

The outlet tester shows if there are problems of malfunctioning and also the taking of land, and that makes it possible to work more safely. Orange pilot, indicator of phases; neutral blue, indicator pilot; and green indicator driver taking of land.