Painsel won the first prize in the category of waterproofing in the competition the best work Sika
July 22, 2009
In the first observation of the saltwater pool had loss of concrete areas, leaving visible the armor, and a lining of resins deteriorated and with small noticeable water leaks from the outside. Due to the need to achieve a finish that is resistant to salt water, together with the requirement of the safety of water, essential for the dolphins that would deal with, Painsel opted for the solution system based on composed of Sikafloor 156-62 Sikaguard epoxy-resin system, protective coating that provides a very aesthetic finish.
The first step was squirting all the support, by removing the paint existing until all the concrete clean and healthy. In this way, the Armors were clean and ready for pasivar. Then it pasivaron the body armor that are visible in specific areas with Sika Top Armatec 11 Epocem, cement and modified epoxy resins, then regenerate the volumes of concrete with cement mortar and sand with Sika Latex, leaving him repaired to paint. then applied with a roller Sikafloor 156 imprinting and the protective coating with epoxy with good chemical resistance resin Sikaguard 62, into two hands.!
