This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Sika en Ferroforma 2009

The new features are for applications of sealing, reinforcement and fillings and anchors and injections

Sika in Ferroforma 2009

Drafting Interempresas19/02/2009

Sika has launched several new features for the sector of the hardware that will show in the next edition of Ferroforma. The news of the signing, supply of specialty chemicals at the international level, are aimed at applications of sealing, reinforcement and seal and fillings, anchors, and injections.

Sika SealTape-S, a waterproof band for sealing of joints and perimeter of tiling and soldiers in damp rooms (consisting of a system)

It's a waterproof tape consisting of a central elastic and one bands mesh sides, which is used as part of a system of sealed in combination with a cementoso sticker, to reinforce the waterproofing of joints between tiles or zones perimeter of wet rooms.

Sika SealTape

It is ideal for:

Sealed perimeter of soldiers and tiling in areas like kitchens, bathrooms, balconies, etc
Sealed perimeter of facades and swimming pools to prevent the entry of water
Sealed both vertical and horizontal movement of insulation boards, boards of connection and construction in corners, meetings of pipes, etc.
For use indoors as foreign

Characterized by high elasticity, impermeability, good chemical, is easy to place and its thermal resistance is from - 25 ° C to + 60 ° C.

Appearance: tape on a roll, with central elastic and knitted mesh sides. The surface is smooth, the thickness of the tape is on the yellow ribbon and 0.60 mm / white fabric form and in rolls of 10 m in length. 1 roll per carton.

SikaBond Q-300, adhesive extra strong curing fast

The new SikaBond Q-300 is a semi-estructural of two components and curing adhesive fast. It is based on ADP, acid-free polymer technology.

Uses:

Multi-purpose adhesive, structural semi to work indoors and in facilities on different media such as: steel, acrylic, aluminum, copper, stainless steel (not recommended for chrome housings), glass, abs, pvc, polycarbonate, pmma, concrete, brick, wood, composites and ceramics. not suitable for PE, PP, silicones, ptfe (Teflon), tile with lotus and chrome housings effect.

Features:

Rapid development of the bond, in a few minutes after application.
High resistance.
Applies traditional gun.
Good adhesion to most of the media.
Non-toxic, no acids or solvents.
Semi-estructural, adequate flexibility.
It dampens vibrations and is resistant to impacts.
It can be used with or without preparation surface (always depending on the conditions of the support).
It can be used at low temperatures.
It does not collapse, even if it is used in roofs.
Resistant to uv rays.

Packaging: cartridges of 150 ml, 20 round box and cartridge 300 ml, 12 cartridges per box.

Sika Boom, foam one-component polyurethane and high expansion, multi-position

It is used as a fixing foam, padding and insulation against noise, cold and draughts. As padding and insulation boards around frames of Windows and doors, pasatubos, holes for air conditioners, drums of blinds.

Features: