Pavimentos And coatings Protecta to renew industrial floors
19 January 2009
Protecta, Barcelona company specializing in the protection, repair and rehabilitation of all types of industrial, new and old soils, provides a complete service ranging from the visit and the advice from the technical to the delivery of the work in record time. The production of their solutions, in his own company, allows you to use raw materials of latest generation, a rigorous quality control and a choice of product suitable to every problem of soil.
Composition of the pavement multi-layer Betunit
Paviento support | Milling depth | -------------- |
Repair | PuTTY-based epoxide resins | Betunit-263 |
Primer | Epoxide resins | SPM |
Layer regularizadora and based on the multi-layer | With incorporation of silices epoxide resins | Betunit-180 |
Finish | Sealed with polyurethane and special silices | Corr-Unit-65 |
The correct application of the Protecta multilayer
The excellent qualities of pavements and coverings multilayer Protecta make that they are suitable when required clean and resistant surfaces. Only a correct and thorough technique employed in the work of preparation and implementation guarantees a perfect finish. Protecta specialists have the machinery and the appropriate tools and provide the expertise and the necessary technical knowledge.
Prior to its placement, it is convenient to mechanically treat the surface of the existing land to open the pores. It continues with scanning aspirate dust and detached particle and applies the product Betunit-263 (two components) using a spatula to the patching of fissures, cracks and peeling. Setting time is 4 to 8 hours.
Then a primer with adherent based PMS is done via a roller (2 components and 4 to 8 hours of setting) to strengthen itself based on the pavement. Apply the Betunit-180 to form a regularizadora layer and spread the first special silices. Then the excess material is swept, are sanded surface and becomes to apply the Betunit-180, layer of finish (6 to 12 hours of setting). Finally, applies the Corr-Unit 65 product with a roller, turns to scatter silica and to implement the 65 Corr-Unit as a layer of sealing (8 to 12 hours of setting).
If the support is in good condition, the protection is limited to a coating multilayer Corr-Unit, consisting of the mechanical treatment of the soil, a possible timely patching of cracks and peeling, and the application of a layer of primer Corr-Unita layer of finish Corr-Unit 40, and finally a layer of sealing Corr-Unit 65.
Signage for industrial flooring, for security, organization and aesthetic requirements is done by Protecta-Duraline, avoiding rapid and premature wear.
Regulations
Betunit-263, Betunit-180 | 53456 DIN, DIN 52 108 |
Primer SPM | CAS 025085-99-8 |
Corr-Unit 65 | DIN 53152 |