Kömmerling celebrates its 25th anniversary in Spain dominating the PVC profiles
The Windows are also the most sensitive points of a House. They escape the degrees of temperature to maintain the environment comfortable. These losses are one of the reasons why spent more energy than is actually needed (up to 47 per cent of energy consumption in Spanish households is intended for heating and cooling) as well as provide an important source of light at home and isolate him from outside noise.
To solve these problems is, the extrusion of plastic profiles is unmatched. Profiles of Kömmerling systems adapt perfectly to the aesthetic needs and isolation of any building offering the best performance in thermal, acoustic insulation, and air permeability, thus having the tranquility always comply with the CTE in all orientations of façade and in all climate zones, always ensuring the best value for money.
The advanced technology of the profiles, the tightness, the thickness of the glass and the distance between crystals, made possible that Windows Kömmerling reduce outside noise that is perceived within the rooms, to achieve a level of higher welfare. But in addition, corners of Windows made of Kömmerling profiles are welded and not glued, and Assembly of watertight joints of synthetic rubber is perfect. As a result, these Windows are the most tight market, avoiding the internal condensation. Unfavorable climatic agents do not pose any concern, that profiles ensures a perfect isolation for years and years. In addition, they prevent the condensation of water and support not only the corrosion, but also the saltpeter and attacks of mildew and bacteria, which can put an end to the life of other profiles or Windows.
The PVC is by nature a very hard material, which due to changes in the molecular formula, exclusive of Kömmerling is gives in its manufacture of a high impact resistance, guaranteed by numerous laboratory tests. Their ability to shock is evident particularly in the corners, where the profiles are soldiers thermally, without glue. The end result is a very homogeneous Union, which seems made of one piece, getting the best mechanical and aesthetic solution.
Pioneers in PVC for construction
In this development play a vital role experts and qualified professionals and the heavy investment Kömmerling annually in r & d, all of this for the benefit of their products and customers. For this reason, Kömmerling is today one of the world leaders in the production of profiles for PVC Windows and has a business presence in over 30 countries with factories themselves, branches and delegations.
Acceptance that Kömmerling products are among the European architects is mainly due to its adaptability to any form and architectural style, its thermal and acoustic insulation capacity and its excellent ratio quality / price. Because of this acceptance, Kömmerling is the first European manufacturer of PVC profiles for Windows systems.
In Spain since 1982
A success that Kömmerling aims to repeat in Latin America, where it is already present in the main markets and based on a dynamic and ambitious plan for future development.
25 years promoting energy saving
To do so Kömmerling has a wide range of systems of woodwork. Include Eurodur 3S, EuroFutur Elegance or Premidoor.
The quality control in the manufacturing process
During the extrusion process, the Department of Kömmerling control short samples of profiles at regular intervals, checking all its properties to meet the highest demands. On the test bench, finished Windows must withstand extreme conditions to ensure their values of impermeability to water and air, and its resistance to strong pressures of wind. Only the highest quality is thus guaranteed to end-user.
Kömmerling has been the leading manufacturer of PVC profiles for Windows which has managed the Spanish mark of Aenor quality product certified for your system Eurodur in Spain. It also has the Aenor certification of registered company.
In Kömmerling, the quality must respond at all times to the highest standards of the industry, by what controls they extend to the whole process of manufacture of the profiles. Raw material is controlled the grain size, the percentage of moisture, impurities, colabilidad, etc. Of the manufacturing process is subject to control the gelling temperature Vicat, elastic module, dimensions and tolerances, etc. On the finished profile, discusses resistance to impact, the resistance of corners, stability, etc., and is a resistance to weathering xenotest.
Windows made of PVC profiles are more insulating than those made with materials like aluminium. This is due to a simple physical law: the lower is the thermal conductivity, greater is the isolation and, while aluminum has an extremely high conductivity coefficient, the PVC is very low. The low thermal conductivity of PVC profiles and the possibility of setting up different types of insulating glass, help keep inside the House a perfect climate, regardless of the cold and the heat that makes the outdoors.
The Windows offer a total imperviousness to water, wind and pollution. PVC Windows do not need to be painted as its surface supports almost no dirt dry, humid or aggressive. They are also easily cleaned.
The PVC woodwork are fitted with reinforced steel galvanized in all its main profiles (frames, leaves, Poles). Leaves large (up to 2.56 square metres), this allows at the same time are able to maintain their benefits, even to the strongest winds, supporting speeds of over 100 kilometres per hour.
From the ecological point of view the PVC is one of the strongest materials. The raw material consists mainly of common salt and its recycling and reuse have reached a very high level.
Caring for the environment with GreenLine
Saving energy, longer than a well thought-out carpentry, manufactured and installed is a determining factor to achieve energy efficiency savings.
The recycling of the cuts in production, even the old frames of PVC. Recycling reduces the energy required for the production of new material, and in turn is an effective way of controlling the discarded material.
The optimization of the raw components. The purest materials allow to ensure durability and aging of the enclosures without degradation or risk to man. On the other hand, the composition of the Greenline profiles deleted altogether heavy, such as lead and cadmium elements, replacing them by others more organic, such as calcium and zinc. GreenLine commitment extends from the beginning of manufacture of the profiles to future recycling.