Alucoil presents a new range of metal composite panels for architectural facades in Veteco
Alucoil will use the next edition of Veteco to present a new unprecedented range of panels composite from noble metals such as stainless steel, copper, aluminium and zinc. All included under the mark Larson Metals, strong ecological character, given that do not receive any treatment, and are fully recyclable.
Stainless steel, dubbed as Larson Inox, panel is composed of 2 sheets of stainless steel of AISI 316 matte, and quality soul of polyethylene with FireRetardant; so adding a thickness of 4 mm. With the peculiarity that the bond between these layers, three times at least the recommended values, so the chances of delamination are extremely remote, not to say impossible. This product is exclusively manufactured in width 1000 mm, although length may reach 8000 mm It enables facade light, because the weight per square meter or even reaches the 7 kg, and with an extraordinary for cutting. Its possibilities are not limited, thanks to its excellent versatility, supporting mechanization for the realization of faults, perforations, curved. It is a material of exceptional characteristics of use and durability, for lack of surface additives, to limit its initial appearance with the passage of time. As reza Alucoil booth, "the degree of development of a society, is proportional to the use of stainless steel."
On the same line Alucoil launches Larson copper, from two sheets of copper of 0.3 mm and soul of polyethylene, which stands out for its excellent planimetry. We are facing an ecological product because it lacks any additive; aspect that allows the evolution of the exterior finish to obtain the characteristic patina. Although this product can be accelerated artificially, through the use of specific products. Thanks to the possibility of machining of the inner face, this product can be installed with various approved systems, allowing to obtain watertight or ventilated façades according to the needs of each project. It had never before been possible to obtain an architectural facade of copper with such planimetry and pieces up to 1000 x 8000 mm. As an example of the excellent behavior of copper, even in the most aggressive environments, Alucoil recalls in its stand that the Egyptians in their hieroglyphics already identified the copper with eternal life.
Polished aluminum and zinc
In order to enrich the range Larson, Alucoil conceived the Panel Composite of aluminium Mill Finish polished and covered with transparent lacquer of high quality, whose appearance resembles the anodized aluminum or stainless steel. Named after Anodic Brushed, has the advantage of allowing run facades with plates of up to 1500 x 8000 mm, thus significantly decreasing the number of entrecalles if desired. Aluminium in the construction is a very efficient, but little valued resource. It is the guarantee of new raw material available and saving energy for the benefit of future generations.