Mapei Launches two new solutions in Construtec
22 April 2013
Mapetherm Tile System Is fruit of the experience of Mapei in the placing of baldosas of ceramics and material pétreo, in the thermal sensors isolation and in the structural reinforcements with compound materials. It uses for the placing of baldosas ceramic and material pétreo of clear colour (index of reflectance >20%), of equal maximum surface to 1.800 cm2 and thickness of 2 cm, on thermal sensors isolation by the outside in panels of XPS and EPS, for buildings of a maximum height of 20 metres. The placing of pieces of gres porcelánico of low thickness (maximum 5 mm) is allowed for formats of until 5.000 cm2.
Ultralite S2 is an adhesive cementoso monocomponente lightened with high provision, highly deformable (class S2), of prolonged open time, with high capacity of impregnación, high performance, easy to work, indicated for baldosas ceramic and material pétreos. Ultralite S2is ideal for the placing of gres porcelánico fine and forms part of the system Mapetherm Tile System
![Imagen](https://img.interempresas.net/fotos/833349.jpeg)
His use recommends , in addition to for the traditional placing on recrecidos and revoke of cement, in recrecidos of anhidrita and revoke with base of plaster (previous application of First G or Echo Prim T), in superposición, and is especially indicated in all the situations where requires the utilisation of a product of adherencia improved and highly deformable, as for example:
- Placing of ceramics of traditional thickness, natural stone no sensitive to the humidity and gres porcelánico fine on external façade.
- Placing on membranes impermeabilizantes type Mapelastic, Mapelastic Smart, Mapelastic AquaDefense and Mapegum WPS.
- Placing on supports deformables no cementosos, recrecidos calefactantes, cardboard-plaster, etc.
- Placing of gres porcelánico fine, gres of traditional thickness and natural stones no sensitive to the humidity, on system of isolation by the outside Mapetherm Tile System.