Röler International in the 2004 BIEMH

Rösler presented in the biennial granalladora new with tape in continuous Rösler model RMBD, which combines the advantages of the granalladoras batch and hooks in a single system. This innovative technology is used in many industries and in particular in stamping industries. From now on can be treated in the same system, lots of small pieces and large pieces of high quality which can be cleaned automatically, deburring, be mateadas and give them a surface finish on the same system. The RMBD model, which combines the advantages of the granalladoras batch and the hooks in a single system. This innovative technology is used in many industries and in particular in stamping industries.

The main feature of the system is the Special conveyor continuous. Its form ensures the regular and continuous, transport while it gently rotates around its own axis. Large parts that are delicate are processed individually while that smaller companies and not so delicate are loaded in batches. The quality of the result and performance, is due to the proximity of the turbines of blasting to the pieces.

A pallet of a considerable amount of aluminium die-cut parts or material can be treated in the system of 5 to 10 minutes.

Through a PLC, they can be programmed and individually controlling the charge cycle, the speed of the conveyor, the dosage of the shot and the muzzle velocity.

The load is carried out manually on the tape of transport or containers in a charger.

Different load times can be set to regulate the speed at the entrance and departure of the transport system.

The system is equipped with a wet filtration system, which can also be used to separate flammable powders and explosives (Exprotection model).