MPE (European, S.L. production machinery) in the 2004 BIEMH

MPE will be present at the biennial to publicize new machines. In addition to the guided Mpe will then show a broad portfolio of products: the milling boring Mecof type bridge with crossbar model PMM, metal disintegrators models GSM 5000k, G50, GMSD 900, Bond Fund of America, EXPM, machining pallets Trevisan with dish of turning CNC Centergrinding machines for profiles with high precision Doebili & Petewe, grinding machine of flat gantry L.G.B model surfaces R 16090, test benches ICP for valves, grinding machine precision to CNC Rollomatic, model model "grindsmart 620xs" and the milling of high speed RödersRFM 600 DS model.

It's a flexible and intelligent solution to the work of drilling and is highly profitable. Performs the deletion of paths and various. Pure manual use without limitations. It has 4-axis numerically controlled. We have prior alignment of the piece. I work at 3 stations around the machine. They are suitable for bulky pieces. The programming is very simple, even without knowledge of CNC.

It offers a great drill for little money. It covers an almost unlimited range of pieces, it is simple in maintenance and robust for its construction. Its use will be profitable, for uniform machining and the small series. This machine is particularly adapted for work of drill with simple tolerances. With three progress of work and 1 x 18 speeds of spindle - box of two rubber - is adapted perfectly to all drill work.

Machinery of production European, S.L. presents the program of standards of machining of Somex units. From 400 Watts to 20 kW, all machining operations are achievable: drilling, threading, milling, bore, deep drilling, turning, reaming. The control can be pneumatic, hydraulic or CNC.

As new features:

The fast and precise machining unit for high precision tools, model MAX4BGV, designed for a maximum of 40,000 rpm rotational speed, 3 levels of speed. Coupling of spindle HSK-C32. Drive system for a variable positioning 360º.

Equipped standard version of a transmission of high delivery and standard shaft, and integrating a motor synchronous piloted by a variable drive shaft for a power of 2 kW S6 maximum. Equipped with ceramic ball bearings hybrid permanent greasing and together labyrinth pressurised air. The unit has an index of IP64 protection. This machining unit responds to the demands of high speed cutting, precision and surface quality.

-Robots for machining: Somex units mounted on robots, mainly used for welding, assembling and maintenance, now also is can drill, through a motorized spindle and a car in advance. In this application for industry aeronautical (aircraft wings), and due to the large number of operations for drilling diameters and different depths to be made, we can see mounted on a gantry of 25 m of career robot as a wholewarehouse and unit MAX5BS of a device by elastic washers and pneumatic release allowing the automatic change of the tools by the robot. Somex has also developed MAX30BS, a system of automatic change of ISO40 spindle machining unit, based on the same principle of the unity MAX5BS

-The unit of threaded programmable MAX 12T allowing the bolt, by court or deformation, wide variety of steps of thread, without changing the spindle pattern. It is a new concept based on a system of differential progress. All the functions of the MAX12T are innovative and can schedule; the speed of rotation, the advance of approximation, of work, length of fast forward and work as well as the recoil.

-The small centre of machining: the combination of a revolver head, model ETR36 of 6 spindles, robust and compact, and the module of positioning of 3-axis numerical control, TRIAX 4, allow to obtain a complete set for different machining. Equipped with a CNC 3 axis, we obtain the basis of a machining center.

Presents a wide range of turrets revolver: square, hexagonal, and drive both electromechanical, hydraulic and servo motor, with or without power tools. Also offers turrets revolver for transfer machines and special.

This brand offers technical support for all Spain and Portugal and porta-herramientas and accessories for sale. Some examples:

It's turrets that are driven by servo motor of hydraulic and alternating current.

The use of these turrets and transfer machines improves the level of production of the equipment as it reduces the time of preparation of tool production. Even in the field of the machining of large series. Introduction of mechanized transfer systems a module of storage of tools which is at the same time porta-herramientas and which made possible a rapid tool change is needed. Sauter has a cost-effective solution with the 170 series revolver turrets. Turrets with tools spindle drive is up 12,000 rpm.

Sauter is known as a supplier of turrets of first category that meet all the requirements of rapid and accurate production. To equip our turrets, it produces the corresponding porta-herramientas motorized and fixed.

• Technology axis B

Complete machining with a single tool increases accuracy and reduces non-productive times.

Spindle axis (b)

Together with the axis and and the storage of tools - the ideal solution.

• Increased productivity thanks to the high-performance turning and milling of complex parts.
• Milling also during rotation

Screw in compact high-performance engine:

• Configured for a rapid change in tools and auto (HSK or capture)
• Exceptional load capacity for operations of milling operations, through the blockade with teeth Hirth.
• Chance of collision, only one tool.
• Extension of the term due to the controlled load of the bearing.
• Unit rotation without game:
• High precision positioning in continuous by AC servo motor and gear gear preloaded (210 degrees rotation angle)
• Blocking of the position of spindle with teeth Hirth in increments of 5 degrees (repetition accuracy +/-0,0008 mm)
• Machining precise outline required by angle measurement system.
• The turntable axis (b) in combination with a turret of disk does not need any storage of tools.
• Positioning in continuum of high precision, without game, by AC servo motor and train of preloaded gearing (angle of 180 degrees rotation).
• Load capacity increased during the operations of machining and evacuation of shavings by blocking with teeth Hirth in increments of 5 degrees (repeat accuracy + - 0,0008 mm on radios to 100 mm)

All machines produced by Mecof are in degree of slabbing and end pieces in a single down. The high speed and high accuracy are the available goals with Mecof machines.

• Performa (Advance Concept Machining)

Machine with mobile table, with tours of 2,300 mm and 1,000 mm X and Z 1,200. Maximum weight of the piece of 7 tons. Acceleration of 5 m/s2, and progress of 28,000 mm/min. Standard head of 4000 rpm 30 kW ISO 50, and optionally electrohusillo of 36,000 rpm to surface finishes at high speed. The correct thermodynamic behavior of the structure and the high rigidity of the central column of the Performa make an ideal machine for roughing and finishing work.

It also sells the single line, line Agile and line Dinamill.