Juan Martín in the 2004 BIEMH
The TCV51A, Center of small dimensions of work (510 x 320 x 300) with standard speed of 12,000 rpm optional but equipped with change of pallets and tools of high speed changer. It also shows the machining center FV102HR of 1020 x 520 x 540, with 15,000 rpm standard and high resolution numerical control specially designed for mechanization of moldistas 3D surfaces.
On the other hand, Matrix is a machine designed for machining 5-axis high-speed, particularly indicated for the operators of the sector of the moulds and dies and the aerospace.
In the two models 800 and 1300, offers a generous amount of work (X = 1800-3000-4500-6000-8000), and = 3900, Z = 1300 for Matrix 1300 and (X = 1600-2500), and = 2000, Z = 800 to Matrix 800, combining contained dimensions and dynamic benefits reaching 40 m/min and Acceleration up to 3 m/s2. Fair sets out the Matrix 800252T
Architecture to bridge of gantry dual type allows to optimize the wide working area guaranteeing the operator maximum flexibility of action, in respect of the safety standards. Matrix consents to position and work with the maximum agility even very large pieces, combining maximum reliability and security with excellent performance solutions.
The geometric design with which Matrix is designed has allowed structural elements that harmoniously combine stability and precision with rapid accelerations of the operating units. The structure can ensure the best performance even in the heavier work. Respecting the technological tradition of Breton, birotativos heads, with continuous rotation of the C axis and the axis that you can work in bajoescuadra (rotation until ±105 º) allow execute quickly the most complex machining, operating simultaneously in three dimensions. n
