Demolition with low emission in a hospital area

The company of demolition Fischer Weilheim Abbruch (FWA), belonging to the Group located in Weilheim/Teck, Fischer has been responsible for carrying out the extensive demolition work prior to the construction of the new clinic for women and children attached to the hospital of Katharin, in Stuttgart, the largest project of hospital construction currently underway in Germany. In planned tight deadlines of work had to be demolished a space of about 50,000 cubic meters, both surface and underground, as well as the subsequent collection of debris with the appropriate machines.

The job is to demolish the old building where was the Department of administration, as well as the warehouse. The more difficult task of the work of demolition was to minimize the emission of dust, noise and vibration, because the rest of the hospital should function in a normal manner during the same. First you should carry out internal shovel and sanitation works.

For these works, FWA has confíado in the heavy demolition of Caterpillar excavators and hydraulic hammers and silent demolition of Atlas copcotools. Through the joint work carried out for years with the manufacturers of construction machinery benefiting mutually from the continuous innovations.

The latest acquisition in the FWA machine fleet is the shear of demolition 6000 CC of Atlas Copco, presented at Bauma 2010. The company has collaborated in the development of the shear, and purchased the first gag of manufacture in series at Bauma 2010 in Munich. Joachim Schmid, responsible for technical of the Fischer group, has said about her that: "the great width of jaw and his great strength, the new CC 6000 U is a great boost for our machinery park." "In addition, it is like the rest of quiet demolition Atlas Copco tools we possess, works very silently, so it can be used without any problem in the Centre of the city".

The new demolition gag allows the demolition of concrete in a much faster way. "Proven design with two cylinders also implemented in the 6000 CC which is of course much better for the excavator during the demolition", adds the director Georg Fischer. In addition, in the work of the newly released CC 6000, also was used the new CC 3300 B with JAWS in the form of cash. Other Atlas Copco construction tools have also been used: a shear hydraulic demolition 3300 CC with universal arm and cutting of scrap, as well as three heavy hammers of 3 to 7 tonnes in service.