Vogel & Noot displays its 'artillery' in machines for soil and forage in Fima 2010

FIMA 2010 is the showcase of the latest innovations in agricultural machinery of Vogel & Noot. Available to the visitor, are the ultimate teams in the Division of spraying, whose existence in the company goes back to two years ago. At that time, and under the trade name of MasterSpray, Vogel & Noot released a line of drag sprayers which comply with relevant environmental norms. Now, Fima 2010 echoes of the presentation of the MasterSpray in 460, with a capacity of 4,600 real liters tank. In addition, Vogel & Noot also exhibits the new Terradrill seeder, which develops two functions simultaneously in a single operation, as well as the trailer self-propelled mixer Verti-Mix double SF, of Strautman, and the range of albums monkey V stands, the French Quivogne.

The new spray of drag MasterSpray in 460 include some of the main technical characteristics. As capacity of 4,600 real liters tank, piston pump and the diaphragm 6-cylinder 320 MA (290 litres / min.), 0-20 bar. It was marketed with Dosicontrol E-5, fully electronic system equipped with control of position and speed sensor, as well as adjustment of hydraulic height inside tanks for an approximate amount of adjustment of 460 litres water wash. MasterSpray in 460 is available with the following equipment: adjustable continuous track of 1650 mm to 2000, tyres 16.9-38 (model AS), fenders, wall anti-roll in the tank filler valve pressurization of the injector, enjague of cans, exterior washing system with roll of hose and sinkto name a few.

In order to obtain maximum performance, the Terradrill, of Vogel & Noot seeder, represents a good alternative. This machine carries out a double role by working operation: preparing the sowing bed and deposit the seeds simultaneously. Suitable for small and medium-size farms, the Terradrill is available with working widths of 3 and 4 meters, in rigid version. A team of coupling, is a highly agile machine. Its operation is as follows: the seeds are prepared with a set of disks for bed of straw (diameter of 460 mm, toothed disc). The elements of planting are positioned directly next to these discs for bed of straw, while the contiguous disk cover the seeds of Earth. As a CODA, the cylinder of follow-up (Terrapak roller or brush with conical rubber ring) tightens seeds intensively. This construction reduces weight and maintains the very compact team. Thus exploit the advantages of this machine ' 2 in 1', even for smaller clocked.

The Strautmann manufacturer, Vogel & Noot exhibits self-propelled mixer Verti-Mix double SF at Fima trailer. Without a doubt, the strength of this team is the power of his engine, mark John Deere, with a nominal capacity of 138 kW (186 HP) and reduced consumption of diesel. Normally, this trailer mixer operates with traction on the rear wheels or, optionally, in all of the vehicle.

A computer controls the Verti-Mix double SF. The machines are programmed in the factory, according to norms and values. The latter are adjusted individually by a technician, with the purpose of obtaining the corresponding operating conditions. In particular, this range of equipment have a system of diagnostic error to discover quickly, any failure or impact through a PC to which they are connected. Maintenance can be carried out remotely via modem.

Currently, the use of trailer mixers is essential in supplying food for ruminants. The mixing of the components of forages in a TMR (mixture of ration) means that animals are no longer selective, so it will take a sample consists of the amount of forage with each bite. In this way, guarantees an optimal feeding cattle of high production, and thus contributes to an increase in the production of milk and a smaller number of metabolic diseases. In addition, you can upgrade based on forage through industrial products of high quality and derivatives. The new mixers Strautman takes account of these physiological advantages and influence in reducing labour costs.

The joint collaboration between Vogel & Noot and the French Quivogne born laid down Mono v, horizontal bending of 32 disks of 660 mm in diameter to a separation of 230 mm with 10 bearings (6 + 4). The stand, designed for a 3.60 m working width, is mounted on a single chassis central 160 x 120 x 8 is a step forward in terms of comfort for the operator. In fact, it opens simultaneously from the cab of the tractor. The setting of the opening is carried out by hydraulic, also simultaneous drive.