Solis presents the new hydrostatic mixed tank

The set of the machine is integrated into a first body with two tanks (emulsion, 5,000 litres, and water, 2,500 litres), and a second removable body that makes up the additive (970 liters) tank, as well as the corresponding platform which is the set of mechanisms for the various services. The chassis that underpins this set is configuration monoblock, with three COTS platform for location of mechanisms and support, built in 5 mm carbon steel plate.

The tank of emulsion, circuit and accessories is located in the rear of the tanker, according to the meaning of the advance of the March. It is made in carbon, quality S235J2G4 steel plate or similar, 4 mm of thickness and pumped funds of the same material of 5 mm of thickness. The section of this tank, as well as that of the whole of the tank, is elliptical in shape, calculated to obtain the maximum capacity in this configuration and dimensions. This tank is accessed from the top of the tank by means of a mouth of man, with hinges and vent. The area of access to this mouth has two overflow of an inch and a half.

The heating system consists of a conducting tube of 6 inches, 168 mm DIN 2448, a burner, a single compressor of 65 litres per minute for air supply to the burner, powered by engine oleohydraulic, as well as a warehouse Assistant for own consumption supply, 50 liters. The output of gases occurs through a high chimney.

Emulsion tank pipes have a lower cleaning of 3-inch hole, a hole of aspiration of product into the emulsion pump and a top entry for the re-circulation of the product. The circuit of emulsion has a device to facilitate daily cleaning. To make this manual irrigation, adopts this circuit with enough hose (6 meters in length), a cane irrigation and sprayer in the product. In addition the tank mounted pump gears up to 250 litres emulsion powered by engine oleohydraulic, with global warming through exhaust of the engine, and easy to clean by diesel per minute. This pump ensures supply of emulsion, recirculating tank and load of the tank.

The tank also has a thermometer of 0 to 120 ° C for measurement of the temperature inside the tank.

The water tank is located in a middle of the set of the tank position and presents some characteristics similar to the tank of additives, with the exception of its capacity, which in this case is 2,500 litres. This tank has front Fund pumped 5 mm of thickness and rear bottom camera to isolate emulsion tank. It has a mouth of man equal to the tank of emulsion, overflow and mouth of output for cleaning of 2 inches. This circuit incorporates centrifugal pump's suction automatically, provided in device of self-priming, capable of driving a flood of 134 liters per minute. His movement is carried out through an oleohydraulic of 1 HP engine.

For its part, the tank for additives is intended for the transport of various additives that may be useful in a work. It is removable configuration, through 4 closures that attached it to the tank of water. In their constructive characteristics, is that they are almost similar to the previous two, counting here with an outlet for the cleaning of 1 inch and a mouth of loading and unloading by means of electric pump. The deposit of additives have an electric self-suction pump up to 2.5 meters of depth and drive up to 9 meters, with a flow of 40 litres per minute at 2,500 revolutions per minute. This pump is equipped with a hose and a grifo-pistola for transfer of fluids.

The hydrostatic mixed tank 8500L is designed for the implementation of storage, transport and irrigation with bituminous emulsion, water or additives work

Finishing and painting

All tanks Solís pass, once completed by a test of tightness, according to specifications of the internal procedure of quality of the brand.

In the same way, cisterns receive, at the end of the manufacturing process, a layer of antioxidant primer on which the final colors of trim (black chassis) and tanks in the color requested by the customer shall apply.

The engine 12 CV, located on the platform of mechanisms, is of the Lamborghini brand. It's a 4 stroke engine air-cooled, fed by a system of direct injection and 567 cubic inches of displacement. It has electric start and independent of 8 litre fuel tank. This engine powered the pumps and motors oleohidráulicos providing the various services of the tank, presenting a highly reliable contrasted with many years of service.

Optionally offers the possibility of equipping the tank with a connection oleohidráulica for the service of a hammer light oleohydraulic, suitable for works of open ditches, cut, drill, etc.

The oleohydraulic tank has a capacity of 100 litres and is equipped with level, filter and filling sealed plug, as well as output of emptying and cleaning. It supplies oil to the whole of the oleohydraulic circuit.

The team also has a 24 V battery, 45 A, for the supply of current to the diesel engine with electric start System.
Also, for the actuation of all pumps and tank engines, it is equipped with oleohidráulicos distributors.

Other auxiliary to highlight elements are: the access ladder, indispensable for access to the top of the tank where they are located the mouths of man; the hood, manufactured in veneer and that allows to cover in full the platform mechanisms, thus ensuring the protection of the various elements to the unfavorable weather conditions; and the 4 lugs, designed to facilitate the operations of loading and unloading of the whole in vacuum by crane.