Ventura forest machines, Saver 2008
September 17, 2008
Hydraulic zanjadoras
The hydraulic zanjadora Bigfo incorporates a compact, powerful transmission to maintain a consistent depth of excavation. It's a machine fitted with a helical system on the side, which can be adapted to minimachines, skid steer loaders and excavators of up to 3.5 tonnes. Bigfo is capable of digging to a depth of 900 mm, a width of up to 200 mm. The manufacturer recommends this zanjadora for the installation of pipes for irrigation, communications and ground force, repairs to roads and construction in general. For its operation, requires a flow minimum of 40 litres and a maximum of 114, as well as a maximum of 240 pounds pressure.
Similar to the previous model, the zanjadora Bigfo X can be adapted to crawler skid steer loaders, excavators, backhoes and telescopic handlers. Bigfoot X can dig to a depth of 1,200 mm, a width of up to 300 mm. This accurate model of a minimum volume of 60 litres and a maximum of 114, and a maximum of 240 pounds pressure.
Wood chippers
The T.A. 140 wood chipper is a model of gasoline with rotation of 360 ° that incorporates an axis for driving on Road (from 25-80 km/h) and an input with adjustable height device. For its part, the T.A. 150 model has the same characteristics for works with diesel instead of gasoline.
The company also has the T.A. 120 model, designed for remains of pruning and garden vegetables; T.A. 160, with a production of 4 to 8 cubic metres per hour, and the Model T.A. 200, for crushing of highly branched branches.
Vertical hydraulic rajadoras
The company has several models of vertical hydraulic rajadoras (12 TN, 15 tons, 20 tons and 22 tons) with a wedge with a distance of 100 cm and an adjustable table in three positions (28-36-61). Hydraulic drive to the tractor or electric motor or diesel, according to the model, they work with a maximum length of 105 centimeters trunks. Optionally, all models can be equipped with a wedge in cross that raja trunks in four with a single movement.
