This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
Implementos Arden Equipment: proveedor total para demoliciónThe company offers a range of 14 models of hammers from 150 up to 4,000 kg
Implements Arden Equipment: total supplier for demolition
Drafting Interempresas02/07/2008
The name of Arden Equipment serves as a reference in the world of the machinery of public works, always in perpetual renewal. His high position in the European market is due to their ability to have been established as the inevitable partner of all manufacturers and importers of machinery. As stated in its advertising, Arden is "the only 'full-liner' independent of Europe".
The venue of burn in France facilities occupy 20,000 m2.
The implements Arden are already well-known among large firms of demolition Spanish, especially their quick hooks, their crushing and their claws of RIPRAP. The cutters are also very prestigious among the tight recycling companies.
Arden Equipment hammers are well known in Northern Europe as one of the most powerful and to overcome the most demanding standards antirruidos, all this thanks to the implementation of the high technical knowledge of its Office of studies.
Arden Equipment in Spain market share is growing constantly, opening hole in a product of which until recently was not well known.
All the Hammers 'AB' have the same technology: the gas chamber has no membrane and there are only 2 pieces on the move: the piston and the pica
For after-sales service, Arden Equipment Iberian has many specialized and equipped with Van workshop mechanics scattered Spain.
Arden has a range of 14 hammers to machinery from 0.7 to 50 t.
Hammers 'Arden breakers'
Arden Equipment offers its customers a range of 14 models of hammers, from AB 152 from 150 kg to minis of 1.3 tons, to the largest, the model AB 4052 of 4,000 pounds for machines of 40 to 70 tonnesvery used in quarries.
All the Hammers 'AB' ('Arden breakers') have the same technology: the gas chamber has no membrane and there are only 2 parts in movement, the piston and the pica, thus limiting the loss of energy, increased the strength of tapping and quantitatively reducing maintenance costs.
According to the customers of Arden, these hammers have a unique quality, which is that not it transmitted vibration to the cabin, increasing the comfort of the driver during their use and reducing the appearance of clearances. The accumulator of nitrogen which possess all the hammers Arden, serves to limit the effect of back pressure produced and prevents the increase of temperature.
Automatic greasing is optional in all of them, although typically installed in hammers from the 1,800 kg of weight.
The pointer guide has great precision and is very resistant, allowing mounting a long pointer which is secured by two pins as in the rest of hammers.
The hammers AB not transmit vibrations into the cabin, increasing the comfort of the driver during their use and reducing the appearance of gaps
All hammers Arden have a case of protection and soundproofing that entirely covers the mechanism, creating a House of soundproofing between the mechanism and the casing that makes the least noisy market of these hammers.
Related Companies or Entities
Arden Equipment Ibérica, S.L.