Arden Equipment: tools of reference across Europe

The implements Arden are already well-known among large firms of demolition Spanish, especially their quick hooks, their crushing and their claws of RIPRAP. The cutters are also very prestigious among the tight recycling companies.

Arden Equipment hammers are well known in Northern Europe as one of the most powerful and to overcome the most demanding standards antirruidos, all this thanks to the implementation of the high technical knowledge of its Office of studies.

Arden Equipment in Spain market share is growing constantly, opening hole in a product of which until recently was not well known.

Arden Equipment offers its customers a range of 14 models of hammers, from AB 152 from 150 kg to minis of 1.3 tons, to the largest, the model AB 4052 of 4,000 pounds for machines of 40 to 70 tonnesvery used in quarries.

All the Hammers 'AB' ('Arden breakers') have the same technology: the gas chamber has no membrane and there are only 2 parts in movement, the piston and the pica, thus limiting the loss of energy, increased the strength of tapping and quantitatively reducing maintenance costs.

According to the customers of Arden, these hammers have a unique quality, which is that not it transmitted vibration to the cabin, increasing the comfort of the driver during their use and reducing the appearance of clearances. The accumulator of nitrogen which possess all the hammers Arden, serves to limit the effect of back pressure produced and prevents the increase of temperature.

Automatic greasing is optional in all of them, although typically installed in hammers from the 1,800 kg of weight. The pointer guide has great precision and is very resistant, allowing mounting a long pointer which is secured by two pins as in the rest of hammers.

All hammers Arden have a case of protection and soundproofing that entirely covers the mechanism, creating a House of soundproofing between the mechanism and the casing that makes the least noisy market of these hammers.