This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Línea de alimentación y corte para acero inoxidable
PRODUCTS
Line feeding and cutting stainless steel
15/03/2002
Cisam Impianti of Monza (Italy) has provided a line of food and cross section in Germany to one of the most important producers of household appliances in the world. The installation has been attached to a line of printing press that produces the wings to kitchens in stainless steel.
In this installation unrolls the band satin Steel and stainless steel with a width that varies from 400 mm to 800 mm and a thickness between 0.35 mm and 1,00 mm.
The line provided by Cisam Impianti is composed of a mobile developer with a maximum load capacity of 6 T equipped with cradle of load, arrollapapel, two mobile enderezadores, a feeder of rollers and a transversal cutting shear. After stacking the package of produced sheets, they are transferred to a line of stamping composed by six presses online.
The line was planned and built according to the requirements of the customer for the production of formats using bands of different materials, from stainless steel to the aforementioned black satin Steel. The client had the requirement to change the type of material without stopping the line to prepare and schedule the enderezadora. In order to solve this need developed two equal, chart enderezadoras on Rails.
Each enderezadora is independent of each other, which, when it is positioned outside the line of work is in stand-by allowing the preparation and cleaning of the roller, an indispensable condition for a perfect development of sensitive materials such as stainless steelused in the manufacture of domestic appliances.
It is very important to ensure that, for aesthetic reasons, the material will not be marked or scratched during the different phases of development. For this reason, all the rollers in contact with the material were built in steel chrome plated and rectified, either coated plastic antifriction, same as the console's introduction of the band.
The enderezadora and the feed rollers are equipped with a device with felt, powered by Jog, making a constant and perfect cleaning of the roller. Scheduled feeder is a type of hydraulic approximation, but it can be also supplied in version with approximation by eccentric.
When the material is protected with role of protection, the line is equipped with an arollador for the same, located between the developer and the enderezadora. This allows the elimination and the roll of film for the protection of the material before the straightening.
This device is also predisposed to be mounted, choice, between feeder and the shear.
The shear is of the type guillotine with several edges of court, with MicroElectroMechanical regulation of light between blades, allowing a very rapid and precise cuts. It's a special shears in which the cutting speed is obtained by means of a camshaft and cylinder of double effect.
The shear is of the type guillotine with several edges of court, with MicroElectroMechanical regulation of light between blades, allowing a very rapid and precise cuts. It's a special shears in which the cutting speed is obtained by means of a camshaft and cylinder of double effect.
This line, as well as all facilities manufactured by Cisam Impianti, can be customized according to the specifications required by the client.
More information:
