This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Hanna Instruments presenta en Smagua su nuevo medidor de pH, conductividad y oxígeno disuelto
Hanna Instruments presents in Smagua his new measurer of pH, conductivity and oxygen dissolved
14/03/2014
14 March 2014
The new Edge is defined by
The Edge measures pH, conductivity and oxygen dissolved by means of digital electrodes. It has automatic recognition of electrode where informs of the type of sensor, calibration and number of series. They connect easily to the Edge by means of a connector ‘plug in' of 3,5 mm. The design of Edge allows so much have it in a hand, in the table of the laboratory or in the wall.
Edge, new measurer of pH, conductivity and oxygen dissolved of Hanna Instruments.
The Edge simplifies the measures, configuration, calibration, diagnostic, register and transfer of data to the computer or to an USB-pen drive. One of the characteristics of the Edge is the exclusive system Cal-Check of warning if the electrode used is not clean or if the solutions have been contaminated during the calibration. In the cases of sensors with ‘matching pin' the Cal-Check also warns if the membrane of the electrode is broken or if the point of union is obstructed.
Stand Of Hanna Instruments in Smagua 2014.
