Atlas Copco contributes more compacidad and robustness in his new team of perforación with reverse circulation

The new Explorac 100 of Atlas Copco is a team of perforación with reverse circulation designed specifically for perforaciones of exploration of until 100-200 of depth. It combines a compact and robust design with the necessary power for a fast taking of samples of quality.

The new team is designed specifically for the perforación with reverse circulation and other applications of perforación with hammer in bottom (DTH). It is adapted for perforaciones of exploration of until 100-200 metres of depth and has a capacity of elevation of 10,5 tonnes.

The reverse circulation is winning terrain like technology preferred to take samples of quality in the initial exploration, the development of yacimientos mineral and the control of law in the hack, thanks to his efficiency of costs and the fast taking of dry samples and of quality.

Explorac 100.

“The launching of the Explorac 100 is a firm answer to the increasing demand of personal hygiene and care of the environingingment. It offers the efficiency and the performance that demand the contractors, such as a set up fast, high speeds of perforación, easy maintenance, low audible levels, spill of minimum oil and a taking of samples with the high level of quality that require the geologists”, self-evident Martin Sommers, vice-president of Marketing and Goods of Team of the division Geotechnical Drilling and Exploration of Atlas Copco. “After the introduction at the beginning of the spring of the Explorac 235 for perforación of half depth, this launching confirms our position in the segment of the reverse circulation”.

The Explorac 100 is based in a technology contrasted. Has a robust and compact design that facilitates his trip even in rugged terrain. Besides, the perforistas will enjoy of the necessary power to obtain more samples of quality in less time.

Atlas Copco can offer a complete solution for the perforación with reverse circulation, including the team of perforación, the compressesor, the booster and the train of varillaje.

Characteristic stood out

• Handle of bars of series, including a warehouse for 30 tubes

• A table of disconnection mechanised with two keys

• The signpost of the operator plants strategically on a tripod or can carry it the hanged operator of the shoulder

• Low audible level for greater hygiene and some better surroundings of work

• Engine Tier III, Cummins, 82 kW, that guarantees a low consumption of fuel

• Hydraulics deposit of cyclonic type with a volume of oil of 30% in comparison with the conventional deposits, what reduces the footprint of carbon of the team.