The hydraulics hammers HB 2000 of Atlas Copco work in South Africa

The hydraulics hammers HB 2000 of Atlas Copco, are powerful and easy to use.

Geopile Africa is installing at present pilot in the installations of the projects of solar plants of the region and for this uses a system of placing of pilot of Duktus in combination with hydraulics hammers HB 2000 of Atlas Copco. The high power and the frequency of impact of the HB 2000 are two important advantages for this type of operations of placing of pilot.

The system of placing of pilot of Duktus concentrates 4 000 J of power by hit of the hydraulics hammer on the zapata guide of the pilot, whereas the hammer offers a speed of 400 hits by minute, what allows to pin pilot them easy and quickly crossing the abrasive layers harder of materials in superficial floors.

“Up to now, our half speed of production is of a battery each five minutes and with four equipment of placing of pilot in the work, can install until 400 pilot of Duktus each day”, explains Jared Prowse. “East has been my aim of speed of production, because in these projects see us forced to install more than 50.000 pilot in a period of work of so alone six months. My aim is to complete all these works of safe form and by in front of the calendar of my customers”.

Excavator Volvo with hydraulics hammers HB 2000 of Atlas Copco.

The hydraulics hammer HB 2000 of Atlas Copco, has a weight of service of 2.000 kg. The system 'VibroSilenced' protect to the operario in front of the noises and the vibrations, whereas the system 'Self-supervision' adapts the frequency and power of impact to the hardness of the rock. The tool is instrumented besides with the system 'ContiLube II', integrated in the system of lubricación automatic. The hammer explains also with the system 'PowerAdapt' that desconecta the engine if the pressesure of oil is excessive, a very useful characteristic when the hydraulics hammer uses in distinct machines bearers.