Doosan Expands the range of hydraulics hammers
5 November 2012
The new hammer DXB130H of Doosan is appropriate for excavators until 22 tonnes, in concrete the excavators of orugas DX160LC and DX180LC and the excavators of wheels DX160W, DX170W, DX190W and DX210W. The DXB130H has an operative weight of 1.090 kg and an power of impact of 2.700 J.
The hammer DXB190H has designed to use in the excavator Doosan of 22 to 30 tonnes, and has an operative weight of 1.815 kg and an power of impact of 4.000 J. It is recognised for his use in the excavators of orugas Doosan of big size, from the DX225LC until the DX300LC.
![Hammer DXB190H Hammer DXB190H](https://img.interempresas.net/fotos/775843.jpeg)
The technology DXB guarantees that the bearer was protected of the effects of the reduction in front of beaks of pressesure. The hammers include: a system of recovery of power and a system patented of valves, that increase the general performance; a pistón and a cylinder of high quality manufactured with precise tolerances; as well as an advanced system of amortiguación that protects the hammers against the hits in empty. The strict tolerances of the pieces used in the hammers translate in lower costs of maintenance.
DXB130H
Weigh of the vehicle bearer: 15-22 t
operative Weight (accommodation): 1.090 kg
Diameter of the tool: 124 mm
Pressesure of operation: 170 bar
hydraulics Discharge required (mín.– máx.): 90 to 140 l/min
maximum Frequency: 650 hits by minute
Power/hit: 2.700 J
DXB190H
Weigh of the vehicle bearer: 22-30 t
operative Weight (accommodation): 1.815 kg
Diameter of the tool: 142 mm
Pressesure of operation: 180 bar
hydraulics Discharge required (mín.– máx.): 120 to 180 l/min
maximum Frequency: 600 hits by minute
Power/hit: 4.000 J