Geobrugg Ibérica, S.A.U. - Miscellaneous construction and public works equipment
Flexible protection barriers: 2 types of barriers, depending on the morphology of the discharge chute
There are two types of barriers, depending on the morphology of the channel of discharge and the project in question. In both cases is normally allows water to pass through the base without hindrance. If in a particular case, the barrier is exceeded, the upper bearing cable wing form provided, ensures a clearly defined section of drain.
-VX barriers: for narrow pronunciation V-shaped channels: in small streams, tumultuous, retention of debris barrier set it without support on the flanks of the canal through spiral cable or self-drilling bolts with flexible head anchors. This type of restraint system is suitable in cases of widths of up to 15 m and a height of up to 6 meters network channel.
-UX barriers: for wide u-shaped channels for debris barriers in older streams are set preferably on two supports in the bed of the sliding channel. This type of retention is indicated for widths up to 25 m and a height of up to 6 m barrier channel
Fields of application:-simple barrier for the retention of small debris flows.
-Multiple barrier for the retention of older debris flows.
-Sink for the braking of the front of the debris flow.
-Protection against clogging of water steps.
-Work of diversion of a debris collector.
-Work of diversion for correction of the course of the canal.
-The undercut and erosion protection.
-Protection of the flanks of the canal against erosion.
-VX barriers: for narrow pronunciation V-shaped channels: in small streams, tumultuous, retention of debris barrier set it without support on the flanks of the canal through spiral cable or self-drilling bolts with flexible head anchors. This type of restraint system is suitable in cases of widths of up to 15 m and a height of up to 6 meters network channel.
-UX barriers: for wide u-shaped channels for debris barriers in older streams are set preferably on two supports in the bed of the sliding channel. This type of retention is indicated for widths up to 25 m and a height of up to 6 m barrier channel
Fields of application:-simple barrier for the retention of small debris flows.
-Multiple barrier for the retention of older debris flows.
-Sink for the braking of the front of the debris flow.
-Protection against clogging of water steps.
-Work of diversion of a debris collector.
-Work of diversion for correction of the course of the canal.
-The undercut and erosion protection.
-Protection of the flanks of the canal against erosion.
